2021 Pivot Trail 429 V3 - Med, Full XT, Carbon Cranks

Up for sale is my 2021 Pivot Trail 429. This bike was purchased new at the end of January, and immediately wrapped in paint protection film. The bike only has about 150miles on it. Only selling because I've been riding Pivots for a long time and want to try out a different brand. Bike is in perfect condition.

Frame: Pivot trail 429 V3, size medium 120mm travel
Shock: Fox Float DPS performance
Fork: Fox 34 Performance 130mm - I can include or install a 140mm air shaft if you prefer. I had planned to put a Grip2 damper in this fork, but ended up being perfectly happy with the FIT GRIP damper's performance and didn't feel it was worth the cost to upgrade.
Headset: Pivot Precision Sealed Bearing
Wheels: DT Swiss XM1700 w/ DT 350 hubs, 36t star ratchet upgrade
Tires: Maxxis DHF, 3C, EXO (not pictured) / Maxxis Dissector, 3C, EXO
Derailleur: XT M8100 12sp
Shifter: XT M8100 12sp
Casette: XT M8100 12sp 10-51 tooth
Brakes: SLX M7120 4 piston
Rotors: Shimano XT 180mm
Crank: Sram X01 Carbon 170mm
Chainring: Wolf Tooth 30t
Saddle: WTB Volt
Dropper: PNW Rainer Gen 3 200mm
Stem: Nukeproof Horizon 35mm
Handlebar: 780mm e*thirteen Plus w/ 35mm rise
Grips: OneUp

The bike started as an XT/SLX build, but I upgraded some of the key components:
Wheels: upgraded from DT Swiss M1900 to XM1700 which have DT 350 hubs w/ upgraded 36t star ratchet
Dropper: Upgraded from 150mm fox dropper to 200mm PNW dropper
Drivetrain: Shifter and casette upgraded from Shimano SLX to Shimano XT
Crank: upgraded from Raceface Ride to Sram X01 170mm w/ Wolf tooth Chainring
Stem and Seatpost Clamp: Both changed to Nukeproof Horizon-Purple
Handlebar: Currently has a 780mm e*thirteen Plus w/ 35mm rise. Can be swapped out for the stock Pivot bar
Grips: Upgraded to OneUp (although this is more personal preference than a true "upgrade")
Rotors: Upgraded from Shimano SLX to Shimano XT 180mm f/r

Some considerations:
-If you prefer a full SRAM drivetrain, I can remove the Shimano shifter, cassette, and derailleur, then add a Sram chainring to the crank, and install a XD freehub body so you can run a Sram cassette. You would obviously get a discount on the bike if you did not want the Shimano stuff.
-I can also swap on the original Pivot handlebar.
-I've got some DMR death grips that look pretty sweet with the purple and blue andodized bits if you want those installed.
-Finally, I can include a 140mm air shaft for the fork.
-Original black Pivot seatpost clamp will be included
-Pedals not included
-Bike will come with the original manual, etc.