2020 Kona Process 153 CR - Hope Build

Kona Process 153 CR 2020. Medium. Silver Hope components throughout, finished off with oil slick bolts, courtesy of the previous owner. As expected from a used mountain bike it does has a few stone chips, rub marks and a bit of a light paint scratch which you can see in the photos. Unfortunately it has not had invisiframe fitted from new, I’d have done it when purchased but it had been used so seen it as pointless. Absolutely beautiful piece of kit and so fun to ride, lot of bike for the price, but can’t afford to keep 2 bikes and other commitments means this needs to go.
Purchased March 2022, only used for a few months before deciding to stick with my other bike and therefore isn’t being used.

Fork: Fox Float 36 performance 160mm.
Shock: Fox Float DPX2 Performance Elite 3-Position.
Wheels: Hope Fortus 30, with Pro4 hubs in silver.
Brakes: Hope Tech3 E4 in silver, Hope 200mm front disc, Hope 180 rear disc.
Drivetrain. Hope oval chainring in silver with matching cranks, brand new unused SLX derailleur (fitted by LBS 25/2/23), SLX shifter, SRAM GX chain and cassette.
Seatpost: Rockshox Reverb 150 with stealth lever (serviced by LBS 25/2/23).
Silver Hope stem, with carbon Nukeproof handlebars (unsure of width) and mint green PNW grips.
Front tyre: Maxxis Assegai 2.5 EXO casing
Rear tyre: Maxxis Minion DHRII 2.4 EXO casing.
Will come with the mint green Crankbrothers Stamp1 pedals as seen in the photos.
The serial number QR has rubbed off from washing but I have attached a photo of it from when I purchased.

Any questions don’t hesitate to ask.
Price is firm.
Preferred collection Port Talbot, South Wales, would meet within reason.
Would ship if buyer organises or at buyers expense (insured up to £100 costs about £50, insured up to £2000/£2500 costs about £150 - obviously varies depending on courier)
Thank you

Original spec and dimensions
https://konaworld.com/archive/2020/process_153_cr_275.cfm