2018 Radial Revere 1.1 (XS/S) Custom build

Radial Revere 1.1 Alloy frame road bike with carbon fork. The custom build makes it ideal for younger rider/racers.
Radial Revere 1.1 alloy frame with Radial carbon forks (size: XS but might be S) that has been custom-built up to suit a young rider. Sadly, he outgrew it and defected to MTB… The bike probably only did 200-300 miles over 1.5 years and he only had one spill on it in that time. The only component that was not new when we built it was the clipless pedals.

Unique spec includes:

SRAM Apex cranks and 1x chainring (170mm / 42T)
Wide range 11-speed Shimano 105 cassette (11-40)
Shimano 105 rear derailleur
Wolf Tooth Road Link to allow the above to work
Shimano 105 STI levers and callipers (rim brake)
Michelin Pro Endurance tyres (with ample life left)
Fulcrum Racing 7 LG straight pull wheelset
Shimano 105 clipless pedals (which were the only component that was not new before going on this bike)
Dead finishing kit (bars, stem, seat post) and new bar tape
White San Marco saddle (not the one in the picture) which is a bit dirty but fully intact

Also included will be an unused (but longer) Deda stem and a few other smaller parts destined for this bike that never made it on (self-extracting crank bolts, down tube barrel adjusters, etc.)

If you wanted to fit a narrower range cassette and double chainring, you’d need new cranks and front derailleur and would need to remove the Road Link.

Has a few signs of use but the frame is in very good condition.

£650 ono. Might be able to post at an additional cost although I may be travelling to Glasgow shortly or can meet at Nevis Range / Laggan Wolftrax or in Inverness when I'm next that way.

The photos were from when it was brand new and just built up. I’ll get up-to-date photos to show minor scratches and wear in the next few days.