2022 Highly upgraded Yahama YDX-Moro Pro w/ 25 miles

X
Loading...
Prev Next
Category: Ebikes - Mountain
Seller Type: Private Seller
Condition: Excellent - Lightly Ridden
Frame Size: L
Wheel Size: 27.5" / 650B
Material: Aluminium
Original Post Date: Jul-08-2023 10:30:59
Last Repost Date: Aug-17-2023 8:24:56
Still For Sale: Sold
View Count: 457
Watch Count: 3
Up for sale today is a size large Yamaha YDX-Moro Pro in the Podium Blue/Nickel color scheme. This bike is mostly new with just a couple of used parts. The bike was used for a couple of photoshoots and has 25 miles on it. The front/rear suspension, bar/stem and most of the drivetrain are all brand new on this bike. The bike is in very good overall condition. There are a couple small scuffs on it from transportation and storage. The bike has never been crashed.

The stock wheels definitely leave a lot to be desired. They were upgraded to a set of Crank Brothers Synthesis carbon. The hubs are Industry Nine Hydras which have 690 points of engagement. The rear wheel has 32 spokes and the front has 28. The stock Highroller tires were upgraded to a Maxxis Minion DHf 2.6" front that features 3C MaxxTerra rubber and has an EXO+ casing. The rear tire is a Maxxis Minion DHr 2.4" that features 3C MaxxTerra rubber and also has an EXO+ casing. The tires are both topped off with Stan's Race sealant.

The fork is a brand new RockShox Yari RC boost. It is 160mm of travel. The rear shock is a brand new RockShox Super Deluxe Select Pluswhich nets 150mm of travel.

The bikes drivetrain was upgraded from 11-speed to 12-speed. The cranks are 170mm Praxis. The SLX 10-51t cassette is brand new as is the XT rear derailleur and SLX shifter. The shifter is I-spec EV, so cleanly mounts to the brake lever. The shifter cable was upgraded to a coated XTR cable for silky smooth shifting. The chain is a Shimano XT M-8100.

The handlebar and stem and both the brand new stock items. The stem is a 40mm with a 35mm clamp. The bar is 780mm wide and has 30mm of rise. The grips are ODI Elite Pro lock-ons. They have a few months of use from a prior bike. The saddle is a WTB Volt with chromoly rails. The Seatpost is a Crank Brothers Highline 7. This post has 170mm of travel, but if you need a shorter one, I also have a 150mm Giant Contact post. The post is actuated with a Shimano SL-MT800 lever which nicely integrates into the left brake lever.

The 4-piston Shimano XT brakes just had brand new Shimano D03S organic pads installed. The rotors are both lightly used Shimano XTR RT-MT900 203mm Icetech rotors.

Included with the bike is the matching Yamaha charger.

Frame Material - Aluminum
Rear Shock - RockShox Super Deluxe Select Plus
Rear Travel - 150mm
Fork - RockShox YARI RC Boost, Tapered aluminum steerer, 1 1/8in - 1 1/2in
Front Travel - 160mm
Headset - Pivot sealed bearings 1-1/8 - 1-1/2" Integrated
Shifters - Shimano SLX, trigger, I-spec EV 12spd
Rear Derailleur - Shimano XT, 12spd
ISCG Tabs - yes, ISCG-05 tabs
Crankset - Praxis ISIS - 170mm
Chainring - Praxis Wave 36T 104 BCD
Motor - Yamaha PW-X2, Quad Sensor System with integrated speed sensor as part of rear hub, rated power: 250W (Nominal), 500W (Max), max torque: 80Nm, max cadence support: 170rpm, max speed support: 20mph, support modes: ECO, STD, HIGH, EXPW, AUTOMATIC (ECO-STD-HIGH)
Battery- Yamaha 500wh, charge life indicator, self diagnosis display
Cassette - Shimano SLX, 12spd, 10-51t
Chain - Shimano M8100, 12spd
Brakeset - Shimano XT M8120, 4-piston, organic pads
Brake Type - hydraulic disc
Rotors - Shimano RT-MT900 203mm front / 203mm rear, Icetech
Handlebar - Alloy 30mm riser bar, 35.0mm diameter, 780mm width
Grips - ODI Elite Pro lock-on
Stem - Yamaha Alloy 4-bolt faceplate, 35.0 diameter, 40mm length
Saddle - WTB Volt, chromoly rails
Seatpost - Crank Brothers Highline 7, 170mm travel
Dropper lever - Shimano SL-MT800 , I-spec EV integrated clamp
Seatpost clamp - Single-bolt 35.0mm
Wheel Build - Crank Brothers Synthesis carbon, E-Mtb 32h rear, DH 28h front, tubeless ready, black double-butted spokes and black alloy nipples
Hubs - [F] Industry Nine Hydra, 28h, sealed bearing [R] Industry Nine Hydra, Microspline, 32h, sealed bearing
Front Axle - 15 x 110mm Boost
Rear Axle - 12 x 148mm Boost
Tires - [front] Maxxis Minion DHf, 3C MaxxTerra, TR, EXO+ [rear] Maxxis Minion DHr, 3C MaxxTerra, TR, EXO+
Tire Size - 27.5 x 2.6in front, 27.5 x 2.4 rear

I'm selling this bike for $3550. It retails for $5499 and the wheels alone are $1699. I will ship within the US, but the buyer pays for shipping. I almost always use BikeFlights which I'm assuming would be less than $180 to anywhere in the lower 48. I accept Paypal payments, buyer pays fees or cash in person.
$3,550 USD
Restrictions: Firm, No Trades, Will ship globally
bunghi avatar
  (Seller History)

Member since Jul 1, 2017
Irvine, United States
X










You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Related Listings



Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv56 0.026494
Mobile Version of Website