2022 Zeb Ultimate 170mm 29" - Needs service
Category: Single Crown Forks
Seller Type: Private Seller
Condition: Poor - Needs Servicing
Wheel Size: 29"
Suspension Type: Air
Steerer Tube Dimensions: 1 1/8"- 1 1/2" tapered
Front Travel: 170 mm
Front Axle: 15 x 110 TA Boost
Seller Type: Private Seller
Condition: Poor - Needs Servicing
Wheel Size: 29"
Suspension Type: Air
Steerer Tube Dimensions: 1 1/8"- 1 1/2" tapered
Front Travel: 170 mm
Front Axle: 15 x 110 TA Boost
Original Post Date: Oct-04-2023 2:02:59
Last Repost Date: Nov-27-2023 10:01:33
Still For Sale: Sold
View Count: 291
Watch Count: 1
Last Repost Date: Nov-27-2023 10:01:33
Still For Sale: Sold
View Count: 291
Watch Count: 1
Selling my 2022 Zeb Ultimate which is in need of an air can service.
The steerer is just over 8" long and has a star nut and crown race installed. Also includes the factory fender as shown in the photos.
The fork 'uppers' (CSU) were replaced under warranty at the end of last year (~40 riding hours ago) due to creaking (a very common problem in 2021/2022 Zeb's). The shop used an upgraded CSU from the 2023 Zeb models that has the creaking issue resolved. New seals were installed when the CSU was replaced.
Unfortunately, the air-spring has 'sucked down' and needs a rebuild. Hoping to sell the fork at a lower price needing the service. If I cannot sell the fork like this I will go and do the service and sell at a higher price. Air can service will run you $100-$200 depending on the shop you go to.
The lowers are wrapped in 3M film to protect the finish, however, the lower non-brake side is scratched as shown in the photos. The rest of the fork is pretty clean.
The steerer is just over 8" long and has a star nut and crown race installed. Also includes the factory fender as shown in the photos.
The fork 'uppers' (CSU) were replaced under warranty at the end of last year (~40 riding hours ago) due to creaking (a very common problem in 2021/2022 Zeb's). The shop used an upgraded CSU from the 2023 Zeb models that has the creaking issue resolved. New seals were installed when the CSU was replaced.
Unfortunately, the air-spring has 'sucked down' and needs a rebuild. Hoping to sell the fork at a lower price needing the service. If I cannot sell the fork like this I will go and do the service and sell at a higher price. Air can service will run you $100-$200 depending on the shop you go to.
The lowers are wrapped in 3M film to protect the finish, however, the lower non-brake side is scratched as shown in the photos. The rest of the fork is pretty clean.
$550 CAD
Restrictions: Reasonable offers only, No Trades, Local pickup only
Vancouver, Canada Related Listings
|
|
|
|
Madison, Wisconsin
|
|
|
|