2023 S-Works Stumpjumper Evo frame build

This beautiful stead is a frame-up dream build. The frame is an S-works Stumpjumper Evo that is protected with Ride Wrap. I am the bike mechanic who built and maintained the bike after every ride. After every adventure, the bike was cleaned, inspected, and the chain was lubed. Here's the parts build list, recent service completed, and recently replaced parts. Specialized recommends this bike to anyone who is 5'5" - 5'11", but I would only recommend this to people who are 5'5"- 5'9".

Here is a video by Pink Bike that goes over everything that you should know about the bike along with the adjustable geometry. The geo is adjustable with a few flip chips and several headset cups that are included with the bike. I also have mutable different styles of bags for the SWAT box. Please note that the specs are a little different; I did not put wireless shifting on the bike because I do not like the feel of wireless shifting, I have a newer shock, and I did not put carbon wheels on my build. https://www.youtube.com/watch?v=x-6TFVMeuAI

The current set-up weighs in at 34 lbs but you can easily make this 31lbs - 32lbs with lighter tires and a reduction of tubeless sealant( I like to put a lot extra in). The frame is in excellent condition. The only noteworthy scratch is on the handlebars.

Build/parts list:

Wheels:
Rims - Spank 350 Vibrocore 29", 32 hole, 30mm internal width (front and rear)
Spokes - Sapim double butted
Nipples - Sapim Brass
Hubs - Industry 9 Hydra (front and rear)
Tires - Specialized Butchers, 29” x 2.6” T9 compound (front and rear)
These tires are currently set up tubeless.

Drivetrain:
Derailleur: Sram XO1 12 Speed
Cassette - GX, 10t-51t
Shifter - Xo1
Chain - XX1 Copper
Cranks - GX, 170mm arm length
Chainring - 32t
Pedals - Deity Tmac, silver

Brakes:
The Levers and Callipers are Sram Code RSC’s
Rotors - Centerline 180mm rear, 200mm front
Brake pad - Metallic

Suspension:
Fork - Fox 36 factory, 160mm, grip 2
Shock - Fox Factory float X

Cockpit:
Bars - Deity Speedway Carbon, 35mm clamp diameter, 30mm rise
Stem - OneUP EDC 30mm
Grips - Deity knuckleduster
Tools - OneUp EDC tool and Muck-off tubeless plug kit

Dropper:
Lever - PNW Lome lever
post - PNW RAINIER GEN 3 170mm-145mm adjustable travel, 34.9 clamp diameter
saddle - Bontrager Arvada, Austenite rails

Recent Service:
New brake pads (2 rides ago).
New rotors(0 rotors).
New Sram dub bottom bracket (0 rides ago).
both brakes were bled (0 rides ago).
The entire drivetrain was cleaned in a parts washer, tuned, and checked for alignment (0 rides ago).
Fresh Stans tubeless sealant was added to both tires(0 rides ago).
All bearings in both hubs were replaced(0 rides ago).
New rear tire (2 rides ago).
The lower headset bearing was replaced with a Cane Creek 40-series zinc-plated bearing(0 rides ago).
The fork had a 50-hour seal, wiper, and air spring service(0 rides ago).
New chain (3 rides ago).