2008 Canfield Brothers Lucky Anodized Freeride Frame

Here is my 2008 Canfield Brothers Lucky downhill / free ride frame. Brand new bearings installed all around. The bearings were hard to source as Canfield only had a scarce amount left and I paid a premium of $40 per bearing for the radial special bearings in the two pivot areas. $160 in bearings alone. Super cool retro frame, laser etched skull and designs in the anodized finish. It's a dark charcoal with the laser etched being polished. I had it built up as a light downhill bike with a dual crown fork. Very light impressions on the sides of the top and down tube from fork bumpers. Strictly cosmetic no structural issues. Welds are great on this frame, super stout. Has its cable wear and scratches here and there I tried to show very close up images of any of the above mentioned. Comes with FSA 1 1/8" reducing headset. Please ask any questions about the frame, it is a medium size. Will ship in the Continental United States only. Local pickup also welcome. Will consider trades for a Downhill or Freeride fork tapered or 1.5 steerer tube. Also hydraulic disc brake sets, crank sets, dropper posts...... Basically any quality parts I can use for other builds. Shock linkage has an upper and lower position I believe for 7 or 8 inches of travel depending on your preference. No shock included but I will include the shock hardware/bolts that were installed previously.
Hope seat clamp included. As well as rear 150mm bolt through axle. Some frame tape residue existing and I have not tried to remove it. This would make for a super cool retro build.