Cascade LT Link for Megatower V1

Selling a V1 Megatower Cascade LT link. It has less than 300 total miles. The link does have some scratches and nicks consistent with small rocks and mud catching between the link and frame, but nothing that could possibly be visible while installed on the bike, and doesn’t effect performance. Bearings are as smooth as silk in the link. It made a phenomenal difference on my Mega.

MSRP on this link is $331

From Cascade Components:
This link can be run with the stock 230×57.5 mm shock, a 230×60 mm shock (stock Nomad size), or a 230×65 mm shock. These equate to travel options of 166 mm, 170 mm, and 180 mm respectively. These options allow you to tune your travel along with the shock to suit the type of riding you do most. The Megatower LT link is designed to maintain the Megatower’s pedaling characteristics. As a result, even with the shock set up to provide 180 mm of travel it will still get to the top of climbs equally as well as with the stock link. By increasing shock stroke bottom out resistance is inherently increased. Because of this with a 230×65 shock can be run with a softer spring to give it more of a mini-dh feel. Alternatively the same spring as before can be used and you can enjoy a greatly increased amount of bottom out resistance.

Specifications:

Fits V1 Megatower frames (2019-2021)
Travel: 180mm (230×65mm shock), 170mm (230×60mm shock), 166mm (with stock 230x57.5mm shock)
+5 mm chainstay length
Sealed Enduro MAX bearings
Increased clearance around BB shell for non-Sram bottom brackets
8mm x 30mm eyelet spacing