2021 Pivot 429 Trail Enduro, Full Custom build

This is a size M Pivot 429 Trail with 29" wheels and 140/120 travel. The bike is fully custom built from the ground up and has a good mix of top shelf and mid end parts, balancing out to what some might call a "lunchride" build. Some of the highlights are full Fox Factory Suspension, a GX AXS Drivetrain with X01 Carbon cranks, Sram Code RSC Four Piston brakes and brand new DT XM1700 wheels. The bike has been ridden for several hundred miles and has the majority of its life ahead of it. No creaking/squeaking, shifting is dialed in, brakes work flawlessly, suspension/dropper are smooth and the brand new wheels are exactly that. There are a few surface level dings/scratches here and there, though nothing that affects the structural integrity or how the bike rides. The worst damage is a small knick on the drive side fork stanchion, though this has been inspected by several shop owners and not of much worry.

If you're on the market for a great do-it-all bike, then the 429 should be on your shortlist. Take it to a DH park and run party laps, or firm up the suspension and go bully some people in lycra kits at an XC race.
This specific bike has the DPS shock with a 36 Factory fork, so you get the 140/120 travel, but no piggy back on the rear shock. So, a more fair way to put it is that this is an Enduro-ish build. With the rear shock from the 429 Trail and the Fork from a 429 Enduro build.

Feel free to reach out with any questions, need for more photos or if you have a reasonable offer in mind. Full build spec below!

-2021 Pivot 429 Trail, Size M, 120mm travel. Custom anodized bolts on cable ports.
-Fox 36 Factory Grip2 Fork, 140mm travel.
-Fox DPS Factory rear shock.
-Sram GX AXS 10-52t Derailleur, Controller, Cassette, Chain.
-Sram X01 AXS Carbon crankset.
-Sram Code RSC Four piston brakes.
-OneUp Carbon bars.
-Brand new DT Swiss XM1700 alloy wheels.
-PNW Range composite pedals
-PNW Loam Dropper post
-PNW Loam Dropper lever
Just north of 31lbs with pedals