2006 Norco Six One - Black - Medium

This is my 2006 Norco Six One. I'm the original owner and have always kept it in tip top shape. As it is right now it's setup more towards DH/freeriding, but throw a set of lighter tires on it and you've got a surprisingly capable cross country bike. The VPS suspension with the propedal shock makes it pedal impressively well up hills, and once you get to the downhill it's a blast.
I've used this bike for both my XC bike and my DH bike for the last 3 years and I've always been able to keep up to my friends on going up and going down.

Highlights & Upgrades:
-Brand new set of Avid Elixir R brakes and rotors installed last summer. 203mm front, 180mm rear. Bled at the end of the season.
-New Enduro pivot bearings and front wheel bearings intalled last fall.
-Crank brothers 50/50 XX sealed bearing pedals.
-Truvativ Shiftguide added.
-SRAM top of the line Flak jacket shift cables installed.
-New SRAM X.9 medium cage rear derailleur installed summer 2008.
-Titec El Norte stem and bar added. Knock-proof rated = no questions asked life-time warranty.
-Comes with 2 seats and posts: the original Titec scoper and SDG I-beam saddle for XC, and a short Axiom seatpost with Tioga seat so you can run the seat fully slammed for DH.
-New Pedros lock-on grips installed last summer.
-Freshly tuned up including cleaning and lubing the shifter internals.
-Fork overhauled and oil changed last summer.


The bad news:
-The right stanchion on the fork got scratched up in a crash at Moose last summer. It happened at the beginning of the season and I smoothed them down and filled the deeper ones right away. They're pretty smooth to the touch and even after a season of riding on it the seals haven't leaked a drop.
-The rear shock could really use a service. It's rideable as it is, but sending it in would make the bike ride a whole lot better. I believe it's about $100 to get that done by Fox.



Full parts list: (* means upgraded from stock)
Frame Set
Frame 6061 Aluminum, 6.5" Travel
Fork Marzocchi Z1 Light QR-20 - 150mm
Shock Fox DHX-3 Coil
Size Medium / 17"
Color Anodized Black

Wheelset
Front Hub Syncros 20mm
Rear Hub Syncros 135/10mm
Rims Syncros DP-25
Spokes DT Stainless Black

Components
*Stem Titec El Norte
*Bar Titec El Norte 31.8
*Post Titec Scoper Telescopic, I-Beam / +Axiom post
Grips Pedros Lock-on
*Saddle SDG FRD I-Beam / +Tioga DH seat
Headset Ritchey Scuzzy Logic Pro Alloy

BrakeSet
*Front Brake Avid Cleansweep G3 8"
*Rear Brake Avid Cleansweep G3 8"
*Brake Levers Avid Elixir R

Drivetrain
Crankset Truvativ Stylo GXP
*Chainguide Truvativ Shiftguide
*Pedals Crank Brothers 50/50 XX
Chain Sram PC-970
Freewheel Sram PG-950
FrontChanger Shimano Deore
Rear Changer Sram X-9
Front Shifter Sram X-9
Rear Shifter Sram X-9, 9spd


Here's the link to the original specs, plus the geometry.
http://www.norco.com/2006bikes/bike_enlarged.php?lang=en&loc=fs&sloc=am&tabloc=1&id=sixone&col=matteblack

Let me know if you have any questions or want some more pictures.