2007 Santa Cruz Nomad (Large), Chris King Customs on Mavic 823 Ri
Category: Enduro Bikes
Frame Size: L
Wheel Size: 26"
Frame Size: L
Wheel Size: 26"
Original Post Date: Oct-09-2011 2:39:08
Last Repost Date: Oct-09-2011 2:39:08
Still For Sale: Sold
View Count: 283
Watch Count: 0
Last Repost Date: Oct-09-2011 2:39:08
Still For Sale: Sold
View Count: 283
Watch Count: 0
NEW PRICE: $2,250! OBO Santa Cruz Nomad (Large), Chris King Customs on Mavic 823 Rims, Fox Float 36 Fork, Fox DHX Air Rear Shock
$2,250. USD OBO
Get Some – and check out the pics and part specs below. This is a DH rocket and a damn fine trail-bike. You’re not winning any XC races on this rig, but who gives a sh_t. The components are extremely stout and perfect for anything from aggressive all-mountain to DH. The frame has an anodized black finish and shows typical cosmetic wear from chain-slap and gravel/rocks getting kicked up by the wheels (look at pics). Other than that, the frame is in great condition (no cracks, dents, etc.). The fork sanctions and rear shock sanction are absolutely free of any mark or scuff. I purchased this bike new from a local shop in St. Louis and have been the only owner/rider. Most miles have been on trails in MO / St. Louis region. The Chris King hubs have been professionally serviced and are in excellent condition.
I believe it is a 2007 or 2006. The book/CD that came with the Fox fork says 2007 on it. I purchased the bike in early 2007. However, I’m not sure how long it was sitting on the shop floor or as just a frame. It has a ‘Made in USA’ label on the seat tube, so it was definitely when Santa Cruz was still manufacturing bikes in the US. Let me know if you have any other questions. Thanks.
Contact me with any questions or if you want pics of specific parts, etc. Sorry – I didn’t have time to clean the trail dust off the bike for the pics (I have a 2yr old...).
Fork: Fox Float 36 R 160mm travel, 20mm axle
Shock: Fox DHX Air (all seals, rings, & pivot hardware professionally replaced about a month ago – only a few rides since)
Wheels: custom built wheelset by Speedgoat: Chris King hubs laced to Mavic 823 UST Rims (highest-end DT Swiss spokes, 32 Front, 36 Rear), Rear Chris King hub has Chris King Fun-Bolts/axle 135mm, Front Chris King hub is 20mm. Rims can be used with UST tubeless tires or standard tubes/tires. I paid over $1.2K for the wheels alone.
Headset: Chris King
Handlebar: Easton Carbon Monkey-Light DH
Stem: Easton Vice 31.8 Bar
Cranks: Race Face Atlas 175mm (22, 36, w/ e13 Polycarbonate Bash Guard)
Brakes: Avid Code (rear, 203mm), Avid Juicy Seven (front, 203mm)
Rear Derailleur: Sram X9
Front Derailleur: Shimano XT
Shift Levers: Sram X9
Cassette: Sram 990, 9 speed
Seatpost: SDG I-Beam
Saddle: SDG I-Beam
Grips: ODI Steve Peat Lock-on
Tires: Maxxis Minon DH (2.5, front) & Maxxis High Roller DH (2.5 rear)
***Pedals are not included with the bike.***
$2,250. USD OBO
Get Some – and check out the pics and part specs below. This is a DH rocket and a damn fine trail-bike. You’re not winning any XC races on this rig, but who gives a sh_t. The components are extremely stout and perfect for anything from aggressive all-mountain to DH. The frame has an anodized black finish and shows typical cosmetic wear from chain-slap and gravel/rocks getting kicked up by the wheels (look at pics). Other than that, the frame is in great condition (no cracks, dents, etc.). The fork sanctions and rear shock sanction are absolutely free of any mark or scuff. I purchased this bike new from a local shop in St. Louis and have been the only owner/rider. Most miles have been on trails in MO / St. Louis region. The Chris King hubs have been professionally serviced and are in excellent condition.
I believe it is a 2007 or 2006. The book/CD that came with the Fox fork says 2007 on it. I purchased the bike in early 2007. However, I’m not sure how long it was sitting on the shop floor or as just a frame. It has a ‘Made in USA’ label on the seat tube, so it was definitely when Santa Cruz was still manufacturing bikes in the US. Let me know if you have any other questions. Thanks.
Contact me with any questions or if you want pics of specific parts, etc. Sorry – I didn’t have time to clean the trail dust off the bike for the pics (I have a 2yr old...).
Fork: Fox Float 36 R 160mm travel, 20mm axle
Shock: Fox DHX Air (all seals, rings, & pivot hardware professionally replaced about a month ago – only a few rides since)
Wheels: custom built wheelset by Speedgoat: Chris King hubs laced to Mavic 823 UST Rims (highest-end DT Swiss spokes, 32 Front, 36 Rear), Rear Chris King hub has Chris King Fun-Bolts/axle 135mm, Front Chris King hub is 20mm. Rims can be used with UST tubeless tires or standard tubes/tires. I paid over $1.2K for the wheels alone.
Headset: Chris King
Handlebar: Easton Carbon Monkey-Light DH
Stem: Easton Vice 31.8 Bar
Cranks: Race Face Atlas 175mm (22, 36, w/ e13 Polycarbonate Bash Guard)
Brakes: Avid Code (rear, 203mm), Avid Juicy Seven (front, 203mm)
Rear Derailleur: Sram X9
Front Derailleur: Shimano XT
Shift Levers: Sram X9
Cassette: Sram 990, 9 speed
Seatpost: SDG I-Beam
Saddle: SDG I-Beam
Grips: ODI Steve Peat Lock-on
Tires: Maxxis Minon DH (2.5, front) & Maxxis High Roller DH (2.5 rear)
***Pedals are not included with the bike.***
Warning: This listing is out of date. You must Edit this item before you can repost!"
$2,250 USD
St. Louis, United States Related Listings
|
|
|
|
|
|
|
|