Pinkbike will be undergoing scheduled maintenance on May 29 at 9pm PST for up to 6 hours. We apologize for any inconvenience caused during this time.
Powered by Outside

want to put rigid 14mm forks on my bike with a 10mm axle what can i do?

PB Forum :: Dirt Jumping & Street
want to put rigid 14mm forks on my bike with a 10mm axle what can i do?
  • Previous Page
Author Message
flag kean99
Posted: Feb 8, 2008 at 12:09 Quote
pretty much described it in the title ! i saw these adptor spacer thing from identiti but u can only get them with the forks
flag DMerritt
Posted: Feb 8, 2008 at 12:13 Quote
keandmr wrote:
pretty much described it in the title ! i saw these adptor spacer thing from identiti but u can only get them with the forks

buy them for the adapter then eBay the forks.....
flag kean99
Posted: Feb 8, 2008 at 12:15 Quote
i dont have the money otherwise i would
and wtf i would keep them then wouldnt i
flag
Posted: Feb 8, 2008 at 12:24 Quote
Here you go mate

http://www.alansbmx.com/product_info.php?products_id=3567

Used 'em myself, seem perfectly fine
flag kean99
Posted: Feb 8, 2008 at 12:29 Quote
m8 u r a f*cking legend!
flag DMerritt
Posted: Feb 8, 2008 at 12:36 Quote
keandmr wrote:
i dont have the money otherwise i would
and wtf i would keep them then wouldnt i

oic, thought you only needed adapter? it what i didfor an extra GH controller, and it was cheaper than buyin just the controller.
flag spag
Posted: Feb 8, 2008 at 12:54 Quote
they wont work ur hub is 9mm, and the spacers will only work with 10mm. i know i had the same problem
flag spag
Posted: Feb 8, 2008 at 12:57 Quote
wont work. ur hub is 9mm, the spacers are for 10mm
flag kean99
Posted: Feb 8, 2008 at 12:58 Quote
what will they just be slack or summin?
flag spag
Posted: Feb 8, 2008 at 13:03 Quote
dont try it u will f*ck everything up, i had the same problem as u. either get a new hub, get a custom spacer made, or get a different fork
flag kean99
Posted: Feb 8, 2008 at 13:04 Quote
i have a 14mm hub but i dont want to change the hub
flag kean99
Posted: Feb 8, 2008 at 13:05 Quote
ill probs will just do that cheers anyway guys
flag nickbdhstreet
Posted: Feb 8, 2008 at 13:06 Quote
ive got exactly the same problem!! im checkin with ISON distribution (the u.k dealer for identiti) if they can send my lbs a pair, but they dont come as spares so i'll probs have to make some or something. im using a bolted axle front non disc dmr revolver, which i think is a 9mm.
flag
Posted: Feb 8, 2008 at 13:07 Quote
Yeah I'd get a new hub

You could make something on a lave. Wouldn't be all that hard actually. just got to make sure its all central.
  • Previous Page

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.008400
Mobile Version of Website