hey, im planning on building this pair of wheel realy soon, people bene telling me its the best setup for a very light and strong wheel, so i was wondering if all will fit, before buying evrything!
I dont know for the spokes and the nipples, people say that the only spokes and nipple that fits well are the pimp spokes and the torque nipple by atomlab, but on their site it says the pimp spokes will fit on any atomlab hub... will it fit on the hope pro 2 ?
edit: i dont understand how you put a little gear on the rear :S ?
yeah i understand its gonna be stronger but almost all the 26wheels has 36 spokes, a 24 is smaller wich make it stronger and need less spokes...
in my opinion
24 with 32 spokes = 26 with 36spokes
confirm / deny, i could be wrong...
and i still dont know if evrything will fit perfectly a guy from atomlab answered me that: If your flange diameter is between about 56mm and 63mm then they will fit. Just measure from center of spoke hole to center of spoke across the side of the hub.
but i dont realy understand , and i dont have my hub at the moment...
anyway keep helping, im ordering evrything this week =]
and technicly ur rim is going to be lighter wen its got more holes in it. 17g per spoke isnt going to make a diffrence but 4 more spokes is when ur about to case a jump. thats my
and technicly ur rim is going to be lighter wen its got more holes in it. 17g per spoke isnt going to make a diffrence but 4 more spokes is when ur about to case a jump. thats my