Powered by Outside

Demo 8

Author Message
flag brad1001
Posted: Dec 11, 2008 at 8:59 Quote
marquis wrote:
brad1001 wrote:
marquis wrote:
how do you get the rear offset to 6mm.

mate i was just thinking that aswell.

nice but just to heavy.

3700 grammes is very heavy for a wheelset.but they do look good.
flag pbuser102331
Posted: Dec 11, 2008 at 9:01 Quote
brad1001 wrote:
marquis wrote:
brad1001 wrote:


mate i was just thinking that aswell.

nice but just to heavy.

3700 grammes is very heavy for a wheelset.but they do look good.

Salute
flag Flyingdane
Posted: Dec 11, 2008 at 9:04 Quote
marquis wrote:
brad1001 wrote:
marquis wrote:
how do you get the rear offset to 6mm.

mate i was just thinking that aswell.

nice but just to heavy.

its like 19.2kg at the moment so if i chance the tire's, tubes and som other small part's i can loos like 1.5kg
flag pbuser102331
Posted: Dec 11, 2008 at 9:05 Quote
Flyingdane wrote:
marquis wrote:
brad1001 wrote:


mate i was just thinking that aswell.

nice but just to heavy.

its like 19.2kg at the moment so if i chance the tire's, tubes and som other small part's i can loos like 1.5kg

not bad then really,but what about the offset.
flag jumphilo
Posted: Dec 11, 2008 at 9:13 Quote
Flyingdane wrote:
Yeah GO for the DEMO, its a really really nice bike Smile

This is my new Build for the year 2009 Whip

Unsecure image, only https images allowed: http://i361.photobucket.com/albums/oo58/dMITIj/S5000690.jpg

How do you get them wheels fit in the back ? it's an asimetrical rear end right.... ? is it custom made for demo ?
flag Flyingdane
Posted: Dec 11, 2008 at 9:18 Quote
marquis wrote:
Flyingdane wrote:
marquis wrote:


nice but just to heavy.

its like 19.2kg at the moment so if i chance the tire's, tubes and som other small part's i can loos like 1.5kg

not bad then really,but what about the offset.

offset?
flag pbuser102331
Posted: Dec 11, 2008 at 9:19 Quote
Flyingdane wrote:
marquis wrote:
Flyingdane wrote:


its like 19.2kg at the moment so if i chance the tire's, tubes and som other small part's i can loos like 1.5kg

not bad then really,but what about the offset.

offset?

like posted above,the demo uses a 6mm offset rear wheel,so that the rim is more central over the rim.
flag xavier11fish
Posted: Dec 11, 2008 at 9:20 Quote
i havnt managed to offset my hope xc on the rear, any tips on how to?

X
flag pbuser102331
Posted: Dec 11, 2008 at 9:22 Quote
xavier11fish wrote:
i havnt managed to offset my hope xc on the rear, any tips on how to?

X

slacken drive side spokes half a turn,and tighten the none drive side half a turn.
flag Flyingdane
Posted: Dec 11, 2008 at 9:22 Quote
jumphilo wrote:
Flyingdane wrote:
Yeah GO for the DEMO, its a really really nice bike Smile

This is my new Build for the year 2009 Whip

Unsecure image, only https images allowed: http://i361.photobucket.com/albums/oo58/dMITIj/S5000690.jpg

How do you get them wheels fit in the back ? it's an asimetrical rear end right.... ? is it custom made for demo ?

I got no problems at all fitting them wheels in to my demo, i dont think that they are any different from a "normally" hub/spokewheel, the hubs are custom made by DT swiss (DT swiss 440 hub)
flag pbuser102331
Posted: Dec 11, 2008 at 9:23 Quote
Flyingdane wrote:
jumphilo wrote:
Flyingdane wrote:
Yeah GO for the DEMO, its a really really nice bike Smile

This is my new Build for the year 2009 Whip

Unsecure image, only https images allowed: http://i361.photobucket.com/albums/oo58/dMITIj/S5000690.jpg

How do you get them wheels fit in the back ? it's an asimetrical rear end right.... ? is it custom made for demo ?

I got no problems at all fitting them wheels in to my demo, i dont think that they are any different from a "normally" hub/spokewheel, the hubs are custom made by DT swiss (DT swiss 440 hub)

the hub will stay the same,but the rim is more centered over the hub,similar to your front wheel.
flag xavier11fish
Posted: Dec 11, 2008 at 9:24 Quote
marquis wrote:
xavier11fish wrote:
i havnt managed to offset my hope xc on the rear, any tips on how to?

X

slacken drive side spokes half a turn,and tighten the none drive side half a turn.

ill give it ago in a few mins, thanks

X
flag pbuser102331
Posted: Dec 11, 2008 at 9:26 Quote
xavier11fish wrote:
marquis wrote:
xavier11fish wrote:
i havnt managed to offset my hope xc on the rear, any tips on how to?

X

slacken drive side spokes half a turn,and tighten the none drive side half a turn.

ill give it ago in a few mins, thanks

X

just do it evenly and until it is centered.
flag brad1001
Posted: Dec 11, 2008 at 9:27 Quote
xavier11fish wrote:
marquis wrote:
xavier11fish wrote:
i havnt managed to offset my hope xc on the rear, any tips on how to?

X

slacken drive side spokes half a turn,and tighten the none drive side half a turn.

ill give it ago in a few mins, thanks

X

just do it slowley mate or youll feck your wheel and have to get it done propley
flag brad1001
Posted: Dec 11, 2008 at 9:28 Quote
sorry i mean proffesionly.i was unsure how to dish my new tornado so i took it to my lbs and he done it for a fiver

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.008724
Mobile Version of Website