Ok, i admit i got beat. But im back with a comeback!
3219891
oh f**k. i dont think im gonna beat that one. my bike has lightened up a bit since i got a bit of money.
Haha, mines about to get alot heveyer. Buying some intence tubes 24 x 3.00 - some halo conta 24 x 3.00 tires - new dmr seat -some sunline thick grips -new brakes
Ok, i admit i got beat. But im back with a comeback!
3219891
oh f**k. i dont think im gonna beat that one. my bike has lightened up a bit since i got a bit of money.
Haha, mines about to get alot heveyer. Buying some intence tubes 24 x 3.00 - some halo conta 24 x 3.00 tires - new dmr seat -some sunline thick grips -new brakes
Should be nice when im finished tinkering
Nice man! Just be careful with that steer tube with that much travel!
oh f**k. i dont think im gonna beat that one. my bike has lightened up a bit since i got a bit of money.
Haha, mines about to get alot heveyer. Buying some intence tubes 24 x 3.00 - some halo conta 24 x 3.00 tires - new dmr seat -some sunline thick grips -new brakes
Should be nice when im finished tinkering
Nice man! Just be careful with that steer tube with that much travel!
Its a steel frame, so it wont just break off mid run, and the frame is made for 150 single, or 170 triples. So i should be safe!
Haha, mines about to get alot heveyer. Buying some intence tubes 24 x 3.00 - some halo conta 24 x 3.00 tires - new dmr seat -some sunline thick grips -new brakes
Should be nice when im finished tinkering
Nice man! Just be careful with that steer tube with that much travel!
Its a steel frame, so it wont just break off mid run, and the frame is made for 150 single, or 170 triples. So i should be safe!
This is my new ride for the year, its an 07 DMR Drone ive been putting together over the last few months to replace my trusty old Bighit.
So far ive replaced as follows...
Fit bmx stem Proper 25t sprocket and seat clamp Kink Pivotal post Odessey plastic saddle 24seven bmx hubs with 12t driver and hollow 14mm axles 24seven 3pc cranks Polished chrome wingbars + ODI ruffians Gusset Half Link chain
Also had to switch the forks as i somehow bent the steerer??? Not keeping the current forks either, saving for some Rebate Parks.
Also need to upgrade the rims as both have a tiny lil flatspot atm, hoping for a purple halo for the rear and something black for the front... Let me know what you all think, and what i could improve.
Unsecure image, only https images allowed: http://i247.photobucket.com/albums/gg147/JBMotorshed/12052009708.jpg Unsecure image, only https images allowed: http://i247.photobucket.com/albums/gg147/JBMotorshed/12052009711.jpg Unsecure image, only https images allowed: http://i247.photobucket.com/albums/gg147/JBMotorshed/12052009710.jpg
This is my new ride for the year, its an 07 DMR Drone ive been putting together over the last few months to replace my trusty old Bighit.
So far ive replaced as follows...
Fit bmx stem Proper 25t sprocket and seat clamp Kink Pivotal post Odessey plastic saddle 24seven bmx hubs with 12t driver and hollow 14mm axles 24seven 3pc cranks Polished chrome wingbars + ODI ruffians Gusset Half Link chain
Also had to switch the forks as i somehow bent the steerer??? Not keeping the current forks either, saving for some Rebate Parks.
Also need to upgrade the rims as both have a tiny lil flatspot atm, hoping for a purple halo for the rear and something black for the front... Let me know what you all think, and what i could improve.
Unsecure image, only https images allowed: http://i247.photobucket.com/albums/gg147/JBMotorshed/12052009708.jpg Unsecure image, only https images allowed: http://i247.photobucket.com/albums/gg147/JBMotorshed/12052009711.jpg Unsecure image, only https images allowed: http://i247.photobucket.com/albums/gg147/JBMotorshed/12052009710.jpg
looks pretty nice man, i got a drone as well, did you build those hubs back onto the standard rims or are they new? i looking to get a new wheelset soon but not sure what. staying rigid so some bmx hubs built on halos or something..
This is my new ride for the year, its an 07 DMR Drone ive been putting together over the last few months to replace my trusty old Bighit.
So far ive replaced as follows...
Fit bmx stem Proper 25t sprocket and seat clamp Kink Pivotal post Odessey plastic saddle 24seven bmx hubs with 12t driver and hollow 14mm axles 24seven 3pc cranks Polished chrome wingbars + ODI ruffians Gusset Half Link chain
Also had to switch the forks as i somehow bent the steerer??? Not keeping the current forks either, saving for some Rebate Parks.
Also need to upgrade the rims as both have a tiny lil flatspot atm, hoping for a purple halo for the rear and something black for the front... Let me know what you all think, and what i could improve.
Unsecure image, only https images allowed: http://i247.photobucket.com/albums/gg147/JBMotorshed/12052009708.jpg
looks pretty nice man, i got a drone as well, did you build those hubs back onto the standard rims or are they new? i looking to get a new wheelset soon but not sure what. staying rigid so some bmx hubs built on halos or something..
I just built the hubs onto the original rims for now.