Looks good. Mine is almost done I just need to put on my new Shimano rt86 brake rotors.
- Chromag bar - ODI Vans grips - 2015 Boxxer Team - Rock shox Vivid r2c - Stans No Tubes Flow ex wheels - Hope Pro 2 Evo hubs - Maxxis Minnions DHF - Shimano Saint m820 brakes - Shimano Saint shifter and derailure - Shimano Saint crank and pedals - Sram 11-28 cassette
2014 Giant Glory 2, 2015 Rock Shox Boxxer team. Rock Shox Vivid R2C, Shimano Saint M820 brakes, Saint Crank, Saint Shifter, Saint derailleur, Hope Pro 2 Evo Hubs, Stans Flow ex wheels, Maxxis Minions DHF 3C
2014 Giant Glory 2, 2015 Rock Shox Boxxer team. Rock Shox Vivid R2C, Shimano Saint M820 brakes, Saint Crank, Saint Shifter, Saint derailleur, Hope Pro 2 Evo Hubs, Stans Flow ex wheels, Maxxis Minions DHF 3C
2014 Giant Glory 2, 2015 Rock Shox Boxxer team. Rock Shox Vivid R2C, Shimano Saint M820 brakes, Saint Crank, Saint Shifter, Saint derailleur, Hope Pro 2 Evo Hubs, Stans Flow ex wheels, Maxxis Minions DHF 3C
hi guys a just bought a glory 0 2014 and i dont like the cable route.... Under the downtube and the bb, why ? i would like to pass the cables on the downtube but i dont know how to fix it, can you have an idea ? thanks !
hi guys a just bought a glory 0 2014 and i dont like the cable route.... Under the downtube and the bb, why ? i would like to pass the cables on the downtube but i dont know how to fix it, can you have an idea ? thanks !
Im trying to find pictures of the route I did on mine but i cant, check my buy/sell ad, there is a one that sorta outlines it. Basically I changed the routing to the top tube and put the brake and shifter cables under the linkage. The lower shock mounts have small holes that you can use for zip tie guides. You need to be careful that the cables dont get crushed and you should also take measures to make sure there is no cable rub on the welds or linkage, but ive done this re-route on 2 glory frames now and it works and looks awesome.
hi guys a just bought a glory 0 2014 and i dont like the cable route.... Under the downtube and the bb, why ? i would like to pass the cables on the downtube but i dont know how to fix it, can you have an idea ? thanks !
Im trying to find pictures of the route I did on mine but i cant, check my buy/sell ad, there is a one that sorta outlines it. Basically I changed the routing to the top tube and put the brake and shifter cables under the linkage. The lower shock mounts have small holes that you can use for zip tie guides. You need to be careful that the cables dont get crushed and you should also take measures to make sure there is no cable rub on the welds or linkage, but ive done this re-route on 2 glory frames now and it works and looks awesome.
I bit the bullet and bought myself a 2nd hand 2014 Giant Glory frame! going to swap over most of the parts from my old Trek Session 10, I'm a tad unsure as to what chain device to purchase though as some folks say its the ISCG system and other are of the opinion it's the ISCG 05.
can any Glory owners confirm which fitment the Glory has....
cheers in advance...
cancel that.....I found the info I was looking for....
Looking forward to receiving the frame tomorrow and to the rebuild with parts from my Old 2007 Trek Session 10 that is now RIP..