Demo 7 owners. check this out !!

PB Forum :: Specialized
Demo 7 owners. check this out !!
Author Message
flag comacruz
Posted: May 4, 2013 at 5:49 Quote
Donodh wrote:
My question is how do I remove the shock spacer ( I have a 2007 demo 7 I )

Very first post in this thread. Loosen preload ring, slide the spring up, and remove the plastic limiter.

Or are you referring to the reducers? Pics?
flag nunnee13
Posted: May 4, 2013 at 14:46 Quote
OoB4K3RoO wrote:
hi guys, i want to upgrade my shock which is 8.5x2.375 would it be possible to fit a 8.5x2.5 i know i'm not changing the I2I length but the stroke is a tad longer can the frame take a slightly longer stroke? thanks
thats fine bud I run stock dhx5 8.5- 2.5 on my 2008 demo 7 ii
flag bikeaddict123
Posted: May 9, 2013 at 6:18 Quote
anyone know the bushing sizes for the lower rear shock bsuhings for my dhx 4.0 on 2008 demo 7? cheers
flag nunnee13
Posted: May 13, 2013 at 1:16 Quote
bikeaddict123 wrote:
anyone know the bushing sizes for the lower rear shock bsuhings for my dhx 4.0 on 2008 demo 7? cheers
speak to tf tuned they will help u and supply u wiv wot u need
flag demo-dood
Posted: Jul 9, 2013 at 22:47 Quote
I've got a rc4 kashima 8.5x2.5 lined up but I just wanna check that it will fit before I go ahead & purchase it, does anyone know?
flag nunnee13
Posted: Jul 11, 2013 at 10:49 Quote
Yes will fit with no worries bud
flag demo-dood
Posted: Jul 11, 2013 at 11:59 Quote
nunnee13 wrote:
Yes will fit with no worries bud
ok,so it requires no mods to fit? just a straight bolt in?
flag nunnee13
Posted: Jul 14, 2013 at 6:16 Quote
Not that I no of bud just swap ove bushes and ur done
flag Tim118
O+
Posted: Jul 14, 2013 at 10:55 Quote
Just picked up a 2009 Demo 7.
What is a good bar/length to run on that bike?

Sorry if it sounds like a stupid question but I usually just run my bikes stock.
My stumpjumper FSR has a 720mm and my P3 has a 750mm.
The stock 09 demo bars seem a little short.
flag Donodh
Posted: Jul 14, 2013 at 11:15 Quote
Tim118 wrote:
Just picked up a 2009 Demo 7.
What is a good bar/length to run on that bike?

Sorry if it sounds like a stupid question but I usually just run my bikes stock.
My stumpjumper FSR has a 720mm and my P3 has a 750mm.
The stock 09 demo bars seem a little short.

770-800 is fine. I run 800 and its great.
flag Rowland44
Posted: Dec 5, 2013 at 18:41 Quote
Any one no witch chain tensioner to buy for the demo 7 as I don't no what will fit.
flag Donodh
Posted: Dec 5, 2013 at 23:14 Quote
Original iscg not the new 05 version
flag mountainman24
Posted: Dec 6, 2013 at 7:21 Quote
I had a Mrp G2 mounted up fine
flag carloscorreia
Posted: Dec 8, 2013 at 14:45 Quote
I had a E-13 LS1 (the steel backplate one - cheaper, no taco) without any fitting problems.
Now running a straitline silent guide, fits just fine too.

slx crankset btw
flag gonzaga8
Posted: Jul 17, 2015 at 15:16 Quote
Can someone tell me where can I buy a 350lbs coil spring for my dhx 5.0? i own a demo 7 II 2008 though
If not what rear shocks will fit my bike?

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv56 0.015877
Mobile Version of Website