Powered by Outside

Post your race Bmx!

PB Forum :: BMX (20")
Post your race Bmx!
Author Message
flag yellowfox
Posted: May 7, 2013 at 8:23 Quote
I'm running a 33/14 setup on my cruiser right now. Tree Lite spline drive sprocket and profile elite cog. I want to get something closer to 39/17 and 32/14 is about as close as I can get without just buying 39/17 gearing.

Are there any spline drive 32t sprockets out there? I'm not finding any.... Looks like I could get a Profile or Gusset 104bcd spline driver spider and then bolt on a 32t chain ring. Are there any other spline spiders out there that you guys know of?
flag nwthumbs
Posted: May 7, 2013 at 8:48 Quote
Does tree no make one?
flag nwthumbs
Posted: May 7, 2013 at 8:49 Quote
nwthumbs wrote:
Does tree not make one?
mobile edit
flag scrippsranchDJ
Posted: May 7, 2013 at 10:57 Quote
nwthumbs wrote:
Does tree not make one?

They go up to 30 and 33. I searched for a bit and couldn't find a 32t spline drive.
flag nwthumbs
Posted: May 7, 2013 at 16:31 Quote
cant find anything either with the few FGFS companies that make sprockets (all spline drive) noen do 32's. may have to go the route of a spider w/ chain ring.
flag scrippsranchDJ
Posted: May 7, 2013 at 17:00 Quote
Even then I couldn't find a chainring in 32t for 5 or 4 bolt spiders
flag yellowfox
Posted: May 8, 2013 at 6:18 Quote
nwthumbs wrote:
blackspire makes a 104BCD 1/8th chainring

http://www.blackspire.com/qs/product/83/5948/263230/0/0.

Yeh I found that same chain ring that would work then just pick up a profile or Gusset spider and should be ok. That blackspire should work with a 3/32" chain right? It says compatible with 9 and 10 speed chains which I believe are thinner than 3/32". Just figured I'd see if anyone knew of other options. 32T spline drive sprocket is non-existent apparently!
flag RideForGlory
Posted: May 8, 2013 at 8:24 Quote
if youre looking for a good chainring, rennen is the way to go !
flag Bmxerch
Posted: May 8, 2013 at 13:28 Quote
RideForGlory wrote:
if youre looking for a good chainring, rennen is the only way to go !

FYP.

Tangent makes a good ring aswell but I'd much rather ride myself a rennen
flag hayden4x
O+
Posted: May 8, 2013 at 14:41 Quote
Bmxerch wrote:
RideForGlory wrote:
if youre looking for a good chainring, rennen is the only way to go !

FYP.

Tangent makes a good ring aswell but I'd much rather ride myself a rennen

I got sent an elevn chain ring recently when the one I originally ordered was out of stock. Thing is pretty rad, much nicer in person than in pics. Still prefer Rennen though
flag nwthumbs
Posted: May 8, 2013 at 21:17 Quote
yellowfox wrote:
nwthumbs wrote:
blackspire makes a 104BCD 1/8th chainring

http://www.blackspire.com/qs/product/83/5948/263230/0/0.

Yeh I found that same chain ring that would work then just pick up a profile or Gusset spider and should be ok. That blackspire should work with a 3/32" chain right? It says compatible with 9 and 10 speed chains which I believe are thinner than 3/32". Just figured I'd see if anyone knew of other options. 32T spline drive sprocket is non-existent apparently!

any MTB guide style ring then, e13, raceface, chromag, hope, renthal, all make one as well. loads more colour options that way too.
flag pedalbear
Posted: May 9, 2013 at 15:04 Quote
Smaller gears will wearout your drivetrain quicker
flag nwthumbs
Posted: May 9, 2013 at 20:44 Quote
that is something to note as well.

mighty easy gearing you are wanting to run as well. either you can spin REALLY QUICK. or have a very tinny track.

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv56 0.013832
Mobile Version of Website