Powered by Outside

Post Your Specialized SX

PB Forum :: Post Your Ride
Post Your Specialized SX
Author Message
flag Russian-guy
Posted: Jan 10, 2015 at 4:34 Quote
Hi guys. I have an idea for my sx 2010. I want change Y-link for Fox RP 23 and install here link from sx trail 2010(11) and change air to some spring suitable in 200 eye2eye. So...where i can buy this link?
flag Russian-guy
Posted: Jan 11, 2015 at 5:52 Quote
Riser2012 wrote:
Have to mod it
Do you have that link ??
flag mankebab
Posted: Jan 11, 2015 at 9:46 Quote
Russian-guy wrote:
Riser2012 wrote:
Have to mod it
Do you have that link ??

http://www.hibike.com/shop/product/p0e93b07ecccfe0efbf68392a14b91cc9/Specialized-Yoke-fuer-Fox-Van-RC-u-a-SX-Trail-MY2012.html

Is that what you ar looking for?
flag milojames
Posted: Jan 11, 2015 at 12:52 Quote
Sx trail 37lbs

are the 09 frames raw or painted silver?
flag sterlingmagnum
Posted: Jan 11, 2015 at 12:54 Quote
qwidgibo wrote:
Sx trail 37lbs

are the 09 frames raw or painted silver?

My copper one is some type of anodizing I imagine the same for the silver since the ghost tribal graphics stuff is on there as well
flag milojames
Posted: Jan 11, 2015 at 12:57 Quote
ok thanks, so if i was gonna do a respray would i need to strip it?
flag sterlingmagnum
Posted: Jan 11, 2015 at 13:09 Quote
qwidgibo wrote:
ok thanks, so if i was gonna do a respray would i need to strip it?

You know that's a good question. I would call a local powder coat guy or something. You may be able to squirt over ano but it may be in your best interest to strip or bead blast. But it seems to me I have heard blasting isn't the best way to go.
flag Riser2012
Posted: Jan 11, 2015 at 13:34 Quote
I've painted over Ano, scuffing is all I needed to do and it worked fine
flag conorrools
Posted: Jan 16, 2015 at 9:52 Quote
photo
photo
photo
photo

Frame and Forks:
2005 SX Trail with Fox Vanilla RC shock and 2006 Marzocchi 66 SL's

Wheels:
Hope Pro 2 Polished with Sun Rhynolite XL's and Sapim Race Double Butted Spokes, Hope steel freehub body, Maxxis Minion DHF's, super tacky 42a front, maxxpro 60a rear 2.5"

Drivetrain:
Shimano zee low ratio mech and shifter, shimano ultegra 11t-23t cassette, Shimano XTR gear cable, Shimano Ultegra 11-23t road cassette, RaceFace Narrow Wide chain ring, Shimano XT Cranks, Nukeproof Electron pedals.

Brakes:
Formula Oro Bianco K24's with goodridge braided hoses, superstar sintered pads

Bars & Stem:
Funn Full On bars 810mm, Hope AM/FR 50mm stem, ODI Rogue Grips, FSA Orbit MX Stem

Seat:
Spank Subrosa freeride seat, Hope QR clamp

Had this a little while my first full sus, happy with how it rides and its fairly light and good fun
My plans are change the seat clamp to black, 203mm rotor up front, 36's up front at 160mm and TF tune.

Let me know what you think Salute
flag sterlingmagnum
Posted: Jan 16, 2015 at 11:28 Quote
Looks really clean,,,new powder coat on the frame?
flag conorrools
Posted: Jan 16, 2015 at 11:41 Quote
Thank, the finish is pretty beat up but the camera makes it look new, anything you would change?
flag sterlingmagnum
Posted: Jan 16, 2015 at 11:45 Quote
conorrools wrote:
Thank, the finish is pretty beat up but the camera makes it look new, anything you would change?

If you are happy with it then nothing, ride it for a month and see what drives you crazy...I would consider since you are running a 1x drive train pay attention to how much uphill peddling you have got with that road cassette...Maybe I am just a wimp but that would beat me up pretty bad....
flag conorrools
Posted: Jan 16, 2015 at 16:21 Quote
I don't pedal up much, too much hard work with the tyres haha, I'll leave as is for now Smile

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.014571
Mobile Version of Website