You had the bearings out for anodizing I would assume, did you have to do any work to the bores to re fit the bearings after?
Yeah bearings were out for anodizing but didn't have to do anything to get them back in. The tolerances only tighten by a few micron. It hasn't been an issue on any bikes I have done plus it looks pretty bad ass that it's uniform every where.
Hi, I've had my scott gambler 710 2016 model stolen from my derby derbyshire home on the 3rd december 2015. Please help me to get my bike back. Any useful help in getting my bike back there will be a kind reward.
Hi, I've had my scott gambler 710 2016 model stolen from my derby derbyshire home on the 3rd december 2015. Please help me to get my bike back. Any useful help in getting my bike back there will be a kind reward.
Hi, I've had my scott gambler 710 2016 model stolen from my derby derbyshire home on the 3rd december 2015. Please help me to get my bike back. Any useful help in getting my bike back there will be a kind reward.
Hi the images you've asked for on the stolen Scott Gambler 710 2016. Its only two weeks old so no scratches or marks on it. It had bright orange DMR VAULT Pedals with blue studs on it. Unsecure image, only https images allowed: http://www.sicklines.com/wp-content/uploads/2015/07/2016-Scott-Gambler-710-linakge-ds.jpgUnsecure image, only https images allowed: http://www.sicklines.com/wp-content/uploads/2015/07/2016-Scott-Gambler-710-back.jpghttp://www.sicklines.com/wp-content/uploads/2015/07/2016-Scott-Gambler-710-ds.jpg http://www.sicklines.com/wp-content/uploads/2015/07/2016-Scott-Gambler-710-nds.jpg Unsecure image, only https images allowed: http://www.sicklines.com/wp-content/uploads/2015/07/gambler-710-spec.jpg
Hi the images you've asked for on the stolen Scott Gambler 710 2016. Its only two weeks old so no scratches or marks on it. It had bright orange DMR VAULT Pedals with blue studs on it. Unsecure image, only https images allowed: http://www.sicklines.com/wp-content/uploads/2015/07/2016-Scott-Gambler-710-linakge-ds.jpgUnsecure image, only https images allowed: http://www.sicklines.com/wp-content/uploads/2015/07/2016-Scott-Gambler-710-back.jpghttp://www.sicklines.com/wp-content/uploads/2015/07/2016-Scott-Gambler-710-ds.jpg http://www.sicklines.com/wp-content/uploads/2015/07/2016-Scott-Gambler-710-nds.jpg Unsecure image, only https images allowed: http://www.sicklines.com/wp-content/uploads/2015/07/gambler-710-spec.jpg
damn dude sorry to hear that, looks like a sick bike anyway. Hope you find it soon, will keep my eyes peeled :/
I'm hoping it wasn't any of my so called mates but not a lot of people knew about it. I think someone was just watching me and came to my home to see where I stored the bike before making a move. It was a proper job though came through the roof and out a window. Left no damage nothing.
You had the bearings out for anodizing I would assume, did you have to do any work to the bores to re fit the bearings after?
Yeah bearings were out for anodizing but didn't have to do anything to get them back in. The tolerances only tighten by a few micron. It hasn't been an issue on any bikes I have done plus it looks pretty bad ass that it's uniform every where.
Heard back from one anodizing shop, guy told me it wasn't worth my time, and that it would turn out bad, and usually anything that has been painted then stripped ends up looking like crap. Sooo I guess they don't wanna do it lol. So I told him id strip and polish the frame, and asked roughly how much to do it, he said they have a 175 dollar minimum charge no matter what, but he would need pics and rough dimensions to give me a proper quote. So I think ill keep asking around, because it really seems like they don't want to do it. Ahh such is customer service here in Canada!
I'm hoping it wasn't any of my so called mates but not a lot of people knew about it. I think someone was just watching me and came to my home to see where I stored the bike before making a move. It was a proper job though came through the roof and out a window. Left no damage nothing.
Man that really sucks, that makes me sick that someone would steal such a beautiful machine. As for the anodizing I guess I just lucked out. I just walked in to the closest anodizer to my house and they were really cool about it. Maybe I should start a business of it and just have people send me frames lol.
Thanks man. Really like how it has turned out. You need to see it in person to truly appreciate how unique ano looks. Also it is very tough and resists scratches really well.