Powered by Outside

Official Calgary Riders Thread

PB Forum :: Canada - West
Official Calgary Riders Thread
Author Message
Posted: Sep 22, 2014 at 20:56 Quote
jason-zee wrote:
I was too sore to hit them today but tomorrow I will be out and have full feed back with photos

Already added another jump and landing since the pictures were posted. Had another kid that was there at the time hit them for me. Everything seems good, line should be completely finished within the next few weeks depending how dedicated I am. Its only me building so it does take a little while.

Everyone can feel free to hit the line just please fix it if you do mess something up. And if a jump looks really fresh and soft please avoid hitting it and give it time to pack in

Posted: Sep 22, 2014 at 21:35 Quote
Ajax-Rider wrote:
jason-zee wrote:
I was too sore to hit them today but tomorrow I will be out and have full feed back with photos

Already added another jump and landing since the pictures were posted. Had another kid that was there at the time hit them for me. Everything seems good, line should be completely finished within the next few weeks depending how dedicated I am. Its only me building so it does take a little while.

Everyone can feel free to hit the line just please fix it if you do mess something up. And if a jump looks really fresh and soft please avoid hitting it and give it time to pack in
absolutely! We can join in the dig if needed

Posted: Sep 22, 2014 at 21:39 Quote
jason-zee wrote:
Ajax-Rider wrote:
jason-zee wrote:
I was too sore to hit them today but tomorrow I will be out and have full feed back with photos

Already added another jump and landing since the pictures were posted. Had another kid that was there at the time hit them for me. Everything seems good, line should be completely finished within the next few weeks depending how dedicated I am. Its only me building so it does take a little while.

Everyone can feel free to hit the line just please fix it if you do mess something up. And if a jump looks really fresh and soft please avoid hitting it and give it time to pack in
absolutely! We can join in the dig if needed

That would be cool but I usually dig from about 9-10:30 in the morning. I work until about sunset so no after work digging. The only days I make a lot of progress are sunday and monday when I have the entire day off

Posted: Sep 22, 2014 at 21:39 Quote
Anybody know where to buy the scotch 2228 mastic tape in town? Spent a few hours calling around for it today with no luck.

Posted: Sep 22, 2014 at 21:41 Quote
I don't know about the scotch stuff but doesn't Rona or Home Depot usually stock mastic tape?

Posted: Sep 22, 2014 at 21:44 Quote
Not one person knew what I was asking for when I called.

Posted: Sep 22, 2014 at 22:02 Quote
ajax-ripper wrote:
Not one person knew what I was asking for when I called.
There was a guy awhile back selling some here so I bought a couple of rolls. The nice 2" wide stuff. Have also bought on eBay. I've never seen it in any store here. Trust me I checked.

O+
Posted: Sep 23, 2014 at 12:01 Quote
Looks like you can find it at Uline.

http://www.uline.ca/BL_6170/3M-2228-Rubber-Mastic-Tape?pricode=DI336&AdKeyword=scotch%202228&AdMatchtype=p&gclid=CjwKEAjwtIShBRD08fKD1OWSik4SJAAuKLovMJAVqVz3T1K5tFf1c-jjteeHwQvAkjGsFclIO3olYhoCjkDw_wcB&gclsrc=aw.ds

O+
Posted: Sep 24, 2014 at 9:12 Quote
ajax-ripper wrote:
Anybody know where to buy the scotch 2228 mastic tape in town? Spent a few hours calling around for it today with no luck.

Did you try Acklands Grainger? I think they have it.

Posted: Sep 24, 2014 at 11:29 Quote
halfstep wrote:
ajax-ripper wrote:
Anybody know where to buy the scotch 2228 mastic tape in town? Spent a few hours calling around for it today with no luck.

Did you try Acklands Grainger? I think they have it.

you are da man:

https://www.acklandsgrainger.com/AGIPortalWeb/WebSource/ProductDisplay/globalProductDetailDisplay.do?item_code=MMM2228-1X10

Posted: Sep 25, 2014 at 16:47 Quote
Crappy Tire for Black Velcro works great too. In the 'fastener' section. Use it for Cable rub protection, silencing Chainguides, Shuttle protection for Dakine Pads and for a bit of BB protection from Rock chips etc. The Scotch stuff doesn't last long or have much durability IMO, but hey, I'm old, what do I know.

Posted: Sep 25, 2014 at 17:30 Quote
quinner wrote:
Crappy Tire for Black Velcro works great too. In the 'fastener' section. Use it for Cable rub protection, silencing Chainguides, Shuttle protection for Dakine Pads and for a bit of BB protection from Rock chips etc. The Scotch stuff doesn't last long or have much durability IMO, but hey, I'm old, what do I know.
I'm actually needing it to splice a hush ish voltage wire

Mod O+
Posted: Sep 25, 2014 at 18:56 Quote
Hey guys I wanted to get some of your feedback on the new trailforks trail interface.
Can you check it out...

http://www.trailforks.com/region/bragg-creek/
http://www.trailforks.com/region/banff/
http://www.trailforks.com/region/canmore/

One of the cool features is the ability go submit trail reports, integrate your gps device and strava to auto checking to the different trails. With all the ride data can then be used by the local trail association to get local tourism and parks to support and legalize more trails. ex of an area stats... http://www.trailforks.com/region/squamish/checkins/

Would like to get some feedback or feature requests from you.

Posted: Sep 25, 2014 at 19:47 Quote
veet-88 wrote:
VW problems?
Need to wrap the 12v for the trunk battery


 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv56 0.015945
Mobile Version of Website