I've had some troubles with the superdeluxe air I bought and I will return it, I think about getting a superdeluxe coil. I cannot find it in 210*55 so I will take the 210*50.
Here is my supposed spring calculation:
What do you reckon ? For an all mountain/enduro use, should i go on the firm side with 650lbs ? The shock has a firm switch for climbings.
Edit: I might have found a 210*55, here is the calculation:
Why 210x50? Here in Europe there are plenty 210x55 coil shocks. You want the full 150 travel instead of 140mm travel. I would go for the 550
I found the dvo jade which has no french after sale service, and fox shox which are a bit too expensive for me. The superdeluxe seems like a good idea but I cant find it in stock anywhere in 210*55. I agree that I should wait to find it in stock to get 150mm.
I also found canecreek but it has too many settings, from a past experience with a fox 40 I dont like having HC, LC, HR, LR.. just compression + rebound and a firm setting for climbing is better for me.
Which model did you have in mind? I agree for the 550lbs I think I will go for it
I've had some troubles with the superdeluxe air I bought and I will return it, I think about getting a superdeluxe coil. I cannot find it in 210*55 so I will take the 210*50.
Here is my supposed spring calculation:
What do you reckon ? For an all mountain/enduro use, should i go on the firm side with 650lbs ? The shock has a firm switch for climbings.
Edit: I might have found a 210*55, here is the calculation:
550lbs seem good?
Thank you
You need to find the proper size shock. I would not settle for the wrong shock stroke/length just because that's all you can find. Hold out or find a shock that's proper, you might regret it if you settle.
I've had some troubles with the superdeluxe air I bought and I will return it, I think about getting a superdeluxe coil. I cannot find it in 210*55 so I will take the 210*50.
Here is my supposed spring calculation:
What do you reckon ? For an all mountain/enduro use, should i go on the firm side with 650lbs ? The shock has a firm switch for climbings.
Edit: I might have found a 210*55, here is the calculation:
550lbs seem good?
Thank you
You need to find the proper size shock. I would not settle for the wrong shock stroke/length just because that's all you can find. Hold out or find a shock that's proper, you might regret it if you settle.
When the Jeffsy came out in 2019 it actually came with a 210x50 shock. It just makes it 140mm travel instead of 150mm. The geometry is the same as they are both 210mm in length.
What up guys. just wandering if a 27.5 rear wheel on an already 29 in. Jeffsy MK2 is a good mullet option. Does anyone have any experence with this setup?
Just measure from the outside, from top of crown to top of stem Add 0.5 to 1 cm to be on the safe side and/or if you want to be able to play with the spacers to adjust the stack