Powered by Outside

Truvativ Stylo 1.1 Crankset removal, need help!

PB Forum :: Mechanics' Lounge
Truvativ Stylo 1.1 Crankset removal, need help!

 Post Message | Latest Comment
Author Message
flag arapp14
O+
Posted: Jun 3, 2010 at 22:29 Quote
Ok so I have the 2008 Truvativ Stylo 1.1 Crankset. I guess it's not that I need help with removing the crank set, it's replacing the bolt that holds my cranks together. To get to my bolt that holds my cranks together on my non driveside crank I need to take out a larger ring shaped thing that holds the bolt in place. Does anybody know what tool should be used?
flag kempie
Posted: Jun 3, 2010 at 23:04 Quote
I think that larger ring is an auto extraction thing - loosten the bolt and it will press on that and remove the crank. I have some stylo cranks too but i havent tried to remove them so i dont know for certain.
flag arapp14
O+
Posted: Jun 3, 2010 at 23:12 Quote
kempie wrote:
I think that larger ring is an auto extraction thing - loosten the bolt and it will press on that and remove the crank. I have some stylo cranks too but i havent tried to remove them so i dont know for certain.
You might be right, the problem though is that I snapped the bolt in half. I snapped the bolt in half before and I took it to my LBS and they removed the outer ring with some tool, that i'm unaware of.
flag kempie
Posted: Jun 3, 2010 at 23:25 Quote
Unsecure image, only https images allowed: http://www.parktool.com/images_inc/repair_help/selfrelease_sram2.jpg
This might work
flag arapp14
O+
Posted: Jun 3, 2010 at 23:38 Quote
kempie wrote:
Unsecure image, only https images allowed: http://www.parktool.com/images_inc/repair_help/selfrelease_sram2.jpg
This might work
oooh thank you veryy much.
flag Hummeroid
Posted: Jun 3, 2010 at 23:51 Quote
Before you screw it up, remember most self extractors are reverse thread. Make sure you turn the correct way.
  • Previous Page
  • Next Page

 


Copyright © 2000 - 2026. Pinkbike.com. All rights reserved.
dv56 0.007224
Mobile Version of Website