Taking apart female hub..help a noob out

PB Forum :: Mechanics' Lounge
Taking apart female hub..help a noob out
  • Previous Page
  • Next Page
Author Message
flag KyleLovesDJ
Posted: Jul 18, 2011 at 18:55 Quote
So this is my first time trying to take apart a hub and the axle is female. Which is effed. I miss the days when i had an nut on my axle. Anyways can anyone PLEASE explain to me how to take apart the hub? i have an NS Rotary by the way.

Thank you so much
flag bernbikeshop
Posted: Jul 18, 2011 at 19:18 Quote
remove the cone spacer on 1 side, then hit the axle with a rubber mallet or a 2x4 (piece of wood)
flag KyleLovesDJ
Posted: Jul 18, 2011 at 19:26 Quote
I will attempt thank you
flag bernbikeshop
Posted: Jul 18, 2011 at 19:29 Quote
is it a front or rear?
flag KyleLovesDJ
Posted: Jul 18, 2011 at 19:33 Quote
Its a rear. How do i even take it off? Like i have to use two wrenches dont i?
flag bernbikeshop
Posted: Jul 18, 2011 at 19:33 Quote
if it's the rear, you remove the left bolt and just pull on the right side and it should come out
flag KyleLovesDJ
Posted: Jul 18, 2011 at 19:35 Quote
right side being drive side?
flag bernbikeshop
Posted: Jul 18, 2011 at 19:37 Quote
yes, just remove the bolt that hold it to frame on the left, then pull on the driver.
if it's stuck you can pull the bolt on the left half way and hit it with a 2x4
flag KyleLovesDJ
Posted: Jul 18, 2011 at 19:39 Quote
okay ill try thank you Smile
flag bernbikeshop
Posted: Jul 19, 2011 at 20:03 Quote
you must unthread the left cone nut, sorry about that.
I took pics
ns rotary rear
ns rotary rear
ns rotary rear
flag KyleLovesDJ
Posted: Jul 21, 2011 at 16:25 Quote
Thanks alot, i figured it out Smile
  • Previous Page
  • Next Page

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv56 0.011263
Mobile Version of Website