Powered by Outside

X - 9, Trigger Shifter Assembley

PB Forum :: SRAM
X - 9, Trigger Shifter Assembley

 Post Message | Latest Comment
Author Message
flag zion-i
Posted: Sep 29, 2007 at 9:53 Quote
Iv got an X-9 trigger shift, with all the parts, and in great shape, im just not sure how to put all the cogs, springs and pins back in place in the inside, iv looked threw the manual for it, but it described nothing about putting together the internals of the shifter, merely how to put a cable into it, which if of no use to me. So if you can esplain how/where to place peaces on the internal of the shifter, it would be a huge help to me!

thank you
flag unclemofo
Posted: Sep 29, 2007 at 13:20 Quote
I need one aswell. My 07 shifter wont down shift, after 4 months of dry riding?
flag brian23
Posted: Nov 12, 2007 at 12:18 Quote
when you say shift down are you talking about in the front deraileuer... cuz i have the same problem
flag camazar
Posted: Nov 12, 2007 at 12:25 Quote
Keep them lubed and they will last a long time WD-40 works fine but just a little
if you ride in dry condishions and work it in keep pressure on the cable and shift up and down lots to free it up just keep trying Sram is the best Smile Smile
flag JeffreyBrooks
Posted: Dec 4, 2007 at 15:22 Quote
unclemofo wrote:
My 07 shifter wont down shift, after 4 months of dry riding?

I had the same problem.

Luckilly I remembered a thread on NSMB a while back.

http://bb.nsmb.com/showthread.php?t=47538&highlight=shifter

Here you go guy's.
  • Previous Page
  • Next Page

 


Copyright © 2000 - 2026. Pinkbike.com. All rights reserved.
dv56 0.010700
Mobile Version of Website