Anyone have the IFP depth measurement for a 8.5" Manitou Swinger 4way? I want to rebuild the shock but not sure where to set the depth of the IFP as I don't have the tool.
EDIT: I ended up calling Manitou and they were very helpful. They said that at full extension the IFP should have a 5mm space between the bottom of the IFP and the piggyback. So to figure out IFP depth, take IFP thikness, say 8mm plus the 5mm cushion and you get 13mm. Then subtract the 13mm from the total piggyback depth. So if your piggyback is 53mm deep, you need to set the IFP at 40mm. Hope this helps everyone, it was very helpful to me.