Banshee Legend Mk2/CCDB Setup

PB Forum :: Downhill
Banshee Legend Mk2/CCDB Setup
  • Previous Page
  • Next Page
Author Message
flag Bucklum
Posted: Jun 14, 2012 at 23:52 Quote
Hey all,

I bought the above recently, the setup is apparently perfect for my weight according to both Banshee and Cane Creek themselves, which is a 350lbs spring, about 5 turns of preload. With that I am achieving about 33% of sag.The high speed compression seems to be a small bit low and the low compression speed feels pretty good.

While the suspension is progressive it's really only getting real resistance in the last 25% of the travel, I haven't ridden the frame properly yet. Just checking to see if anyone has experience with this setup or should I just load up on the high speed compression?
flag Scythe888
Posted: Jun 15, 2012 at 6:51 Quote
Here is a link to there website, input your frame info. It will give you a base tune. It's just a base though, adjust to your liking.

http://ww2.canecreek.com/products/suspension/double-barrel/base-tunes
flag Bucklum
Posted: Jun 18, 2012 at 5:53 Quote
Thats the one I was using. I was just thinking that before I took it out for the first run that it was way too plush to not bottom out, I was wrong. The high speed compression was much more effective than I first thought. Cheers though.
  • Previous Page
  • Next Page

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.010314
Mobile Version of Website