Please help with my cranks

PB Forum :: Dirt Jumping & Street
Please help with my cranks
  • Previous Page
  • Next Page
Author Message
flag konaguy49
Posted: Dec 22, 2012 at 9:32 Quote
I had gusset pygmys for a while. Im sure i had issues getting a sprocket to fit. Perbaps get a 19mm one with plenty of material around the axle are and have a local engineering company macbine it out to 20mm unless you can do it yourself on a ench drill. Of course you would be best measuringvthe axle with calipers first.
flag jakep3595
Posted: Dec 22, 2012 at 10:32 Quote
watsontony wrote:
i have some gusset pigmy cranks.
These are 3pc cranks.
The axle is a 36 spline.
the end of the axle are slightly smaller than the middle.
but after some google searching its pointing towards this being a 20mm axle...

but i have only ever seen 19 or 22 so presumed it was a 22.
so firstly can anyone confirm weather its 22 or 20mm?
would a 19mm 36 spline axle (mtb size) be available form anywear. or.
would a 20mm euro bb be available? providing i can get confirmation that it is 20mm that is.....

don't know if anyone will be of any help but its the end of the world tomorrow so would like to get this sorted cheers watsontony

is defo 20mm i used to have the cranks, only bb i could find in 20mm was the one made by gusset
  • Previous Page
  • Next Page

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.008345
Mobile Version of Website