Powered by Outside

Marzocchi Monster T

PB Forum :: Mechanics' Lounge
Marzocchi Monster T

 Post Message | Latest Comment
Author Message
flag blobmau5
Posted: Mar 20, 2014 at 10:45 Quote
Hi I would to like no if any one will no this:

Im running (2003) Marzocchi Monster T 200mm forks on a commencal supreme v2 but im using the forks at 240mm at the moment would this damage the frame or the forks in anyway, can upload picture so can see.

Plus dos any one no if I can put a fox 40 steerer and top crown on them with them both being 40mm stanchions?

Thanks
Wayne
flag blobmau5
Posted: Mar 20, 2014 at 11:05 Quote
Monster T
  Monster T

Monster T
  Monster T
flag Fisha
Posted: Mar 20, 2014 at 14:31 Quote
You should be ok with the set up.

Not sure about the 40 crown as it depends on how far the legs are apart and not just the width
flag blobmau5
Posted: Mar 20, 2014 at 16:11 Quote
Cheers I dint no if it would damage anything with the crowns being so close to the top of the fork.

I will have to message some one selling one see if they can check the sizes ect.
flag madmax650
Posted: Mar 23, 2014 at 10:24 Quote
Yea, not so sure with the crowns, but I have heard of a monster t RC2.....Fox 40 damper in there and youd have the sickest monster t.
flag blobmau5
Posted: Mar 23, 2014 at 10:27 Quote
madmax650 wrote:
Yea, not so sure with the crowns, but I have heard of a monster t RC2.....Fox 40 damper in there and youd have the sickest monster t.

OK cheers bud will have a look into that
flag bigmoney
Posted: Jun 30, 2014 at 10:02 Quote
Fox 40s are not nearly as wide so the crowns wont be interchangeable. The stanchions are a slimmer diameter up top where ur not supposed to clamp .. looks like ur lower crown is too high
flag bigmoney
Posted: Sep 4, 2014 at 21:40 Quote
The bolts in the crown are going to bend and snap hahahaha thats a liability right there
  • Previous Page
  • Next Page

 


Copyright © 2000 - 2026. Pinkbike.com. All rights reserved.
dv65 0.011887
Mobile Version of Website