Lapierre Spicy with Hope brakes

PB Forum :: All Mountain, Enduro & Cross-Country
Lapierre Spicy with Hope brakes
Previous Page | Next Page
Author Message
Posted: Jul 22, 2015 at 8:27 Quote

might need a hand, I've bought a paire of Hope E4 with Tech 3 levers with Hope 183 rear rotors and 203 front rotor, no issue in the front the fit is perfect with the post to post from Hope,

the issue is in the rear the the H post to post from hope it wont fit since the caliper is hiting the inside of the frame, I was able to fit a 160 rotor but that's less then the 180 whit SRAM Guide RSC that was there...

has anyone been able to figure a way to fit the Hope E4 with 183 rotors on there Lapierre spicy or Zesty? the issue is the caliper is inside the chainstay I think..

any help please

Posted: Jun 13, 2016 at 11:24 Quote
Hi, I have the same problem. The only way I can make it fit is to change the rear disc for a 160. The calliper is to chunky and hits the frame. Alternately we might have to change the calliper for the x2. Really ticked off.

Posted: Jun 20, 2016 at 8:54 Quote
Hi again I had a good think and I'm trying a 203 rotor as the mount shifts the calliper down, i have set the rear up and will upload a pic.

Posted: Jun 20, 2016 at 9:02 Quote

Posted: Oct 3, 2016 at 14:20 Quote
Hi was wondering if you managed to solve this issue? I would like some on my zesty

Posted: Dec 1, 2016 at 6:48 Quote
i havent but just notice someone put a 203 on the rear might try that next

Posted: Mar 24, 2017 at 14:21 Quote
Hi, I have ridden with the 203 rotor on for a while now with no problems, however I think I used a 203 front adaptor as it positioned the calliper into a perfect position.

Posted: May 21, 2017 at 0:35 Quote

You wouldn't happen to be able to post a picture somehow would you?

I have literally just done the exact same, not knowing that I would be having these problems or how much of a ball ache it would be. Someone mentioned using an adapter but I don't know which one if any that I can use.

You say you've been running 203mm rear rotor, other than the bigger rotor size what else would be needed? I'm fairly new to doing all this sort of stuff

Previous Page | Next Page

Copyright © 2000 - 2019. All rights reserved.
dv56 0.012798
Mobile Version of Website