Project BlkMrkt Mob trials build

PB Forum :: Observed Biketrials
Project BlkMrkt Mob trials build
  • Next Page
Author Message
flag craigjtopley
Posted: Apr 17, 2018 at 13:32 Quote
gperkins wrote:
I love it! I am a sucker for orange anodizing.
Thanks, I like the look of the wheels too, its going to look really good when it eventually starts to rust in my opinion.
flag Paradis6
Posted: Apr 18, 2018 at 8:48 Quote
craigjtopley wrote:
The rotors are Hope 203mm saw tooth, they seem to work alright with the bb7 brakes except the brake pads have tabs that hang down off the lower part of the pad that catch on the rivet where the steel rotor attaches to the aluminum spider, I snipped the tabs off with a pair of side cutters and it was all good after that

I also have Hope 203 mm rotors (front and rear) on my hardtail. You probably don't have the right adapters for these brakes ! When I installed the complete E4 brakeset on Shimano 203mm post to post adapter, the caliper touched the adapter... and as I wanted to ride RIGHT NOW, I used the grinder to remove a few mm thick on the adapter !!

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv56 0.011529
Mobile Version of Website