commencal clash

PB Forum :: Commencal
commencal clash
Author Message
flag Alloypenguin
Posted: Mar 4, 2024 at 1:17 Quote
Daniel090609 wrote:
does anyone know what coil shock is compatiable with the commencal c;ash 2021 as i tried to put rockshox super deluxe ultimate byt the fittings on my frame were to small for the shock.

I have a modified (internals only) RSSDU on mine. Fits perfectly. Have a look for the mounting kit online. TFtuned usually stock these.
flag JoshParsons87
Posted: Mar 5, 2024 at 7:51 Quote
Daniel090609 wrote:
does anyone know what coil shock is compatiable with the commencal c;ash 2021 as i tried to put rockshox super deluxe ultimate byt the fittings on my frame were to small for the shock.

Super deluxe ultimate coil fit fine on my 2021 clash. Love the coil so much more than air
flag markrulesok
Posted: Mar 20, 2024 at 14:06 Quote
Anyone compared the 2019-2020 clash to a transition patrol 2018-2020?
flag Mtb-Bandit
O+
Posted: Mar 30, 2024 at 11:27 Quote
Has anyone over stroked a Clash yet 250x75 from a furious?
flag norcohavocdirtjumper
Posted: Mar 30, 2024 at 22:48 Quote
Mtb-Bandit wrote:
Has anyone over stroked a Clash yet 250x75 from a furious?

Not that I've seen in all my scouring about this. I was curious about trying to find a 230x70 shock size but they are usually old shocks and no longer made.

250 is 20mm longer if I reckon correctly.... so I'm not sure how one would be able to make it fit ....

I find the travel of the V2 clash, more than ample as it is though. I will be trying the dynamic position this summer to see if it's funner.
flag Mtb-Bandit
O+
Posted: Mar 31, 2024 at 18:57 Quote
norcohavocdirtjumper wrote:
Mtb-Bandit wrote:
Has anyone over stroked a Clash yet 250x75 from a furious?

Not that I've seen in all my scouring about this. I was curious about trying to find a 230x70 shock size but they are usually old shocks and no longer made.

250 is 20mm longer if I reckon correctly.... so I'm not sure how one would be able to make it fit ....

I find the travel of the V2 clash, more than ample as it is though. I will be trying the dynamic position this summer to see if it's funner.

It fits I should have the bike back soon I’ll post photos
flag letsgethurt
Posted: Apr 14, 2024 at 2:37 Quote
I happen to have a 250x75 shock kicking around so I was curious whether that would fit on the Clash. It doesn't. With the downtube flip chip at the "sensitive" position, without a shock, the chainstays top out on the bb shell with roughly 240mm between the shock mounts. The shock mounts are radiused pretty wide and I don't think there's any room for negotiation with offset bushings or any off the shelf solution. I guess the "dynamic" position would change the max possible eye-to-eye distance a bit? I'd be curious to see if anyone has been able to do this.
flag trumbullhucker55
Posted: Apr 16, 2024 at 15:26 Quote
Does anyone know which adapters I need to upgrade the brakes on the clash to 220mm? I bought this one off Amazon for the front and the brake pads bite only about a quarter inch of the rotor

https://ibb.co/9psQMdV

https://a.co/d/18qahpX

I also have no idea which one is the correct one for the rear.

Thanks in advance
flag norcohavocdirtjumper
Posted: Apr 18, 2024 at 11:51 Quote
trumbullhucker55 wrote:
Does anyone know which adapters I need to upgrade the brakes on the clash to 220mm? I bought this one off Amazon for the front and the brake pads bite only about a quarter inch of the rotor

https://ibb.co/9psQMdV

https://a.co/d/18qahpX

I also have no idea which one is the correct one for the rear.

Thanks in advance

Likely the OG Sram/Avid 20p should work front and back. At least for non maven brakes .... mavens use a specific clearanced sram adapter
flag trumbullhucker55
Posted: Apr 20, 2024 at 13:16 Quote
Bought two QM-46 mounts which worked.
Should be good to go!

https://pasteboard.co/6dArIZ5EgW5f.jpg

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv56 0.010578
Mobile Version of Website