does a 10mm standard bolt axle make your rear triangle much stiffer than the standard qr skewer

PB Forum :: Mechanics' Lounge
does a 10mm standard bolt axle make your rear triangle much stiffer than the standard qr skewer
  • Next Page
Author Message
flag rangemaster
Posted: Sep 16, 2011 at 14:32 Quote
so the drop out are also 10 mm but the rod end of the thru axel won't go into the dropout. the end that has the screw will go in the drop out. so i want to put my qr skewer in but i need like a 10mm rod for it to go throught with screw ends on both sides.
sounds kinda weird so if anything is confusing i'll try to explain better.
flag pbuser102331
Posted: Sep 16, 2011 at 14:35 Quote
rangemaster wrote:
so the drop out are also 10 mm but the rod end of the thru axel won't go into the dropout. the end that has the screw will go in the drop out. so i want to put my qr skewer in but i need like a 10mm rod for it to go throught with screw ends on both sides.
sounds kinda weird so if anything is confusing i'll try to explain better.

Sounds like you need an azonic monetum axle or the dt swiss rwd axle.

Azonic.

Unsecure image, only https images allowed: http://www.pricepoint.com/images/styleImages/D_295%20AZOMT8.jpg
rwd axle.

Unsecure image, only https images allowed: http://www.ukbikesdepot.com/smsimg/42/1627-4453-full-pho_rws_thrubolt_1060x1060_200708-42.jpg
flag rangemaster
Posted: Sep 16, 2011 at 14:38 Quote
I can't tell on the dt but azonic looks exactly like the remedy. Thanks so much.
  • Next Page

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.013068
Mobile Version of Website