Long travel hardtail?

PB Forum :: Post Your Ride
Long travel hardtail?
Author Message
Posted: Oct 2, 2008 at 11:51 Quote
freeridermatt wrote:
cotakid wrote:
and more
photo

2248214

photo

744411

photo

217774

photo

141064


Where do you get all these from?!
lol look up super monster in the picture section...

Posted: Oct 2, 2008 at 12:04 Quote
well if you want big forks....
photo

2029240


Posted: Oct 2, 2008 at 12:06 Quote
webber123 wrote:
well if you want big forks....
photo

2029240


haha, looks like it would snap clean off even if you just jumped on the bike to ride...

Posted: Oct 2, 2008 at 12:13 Quote
killerbikeman wrote:
Graphxxx wrote:
killerbikeman wrote:
idk i would go for the totems

To much maintenance. And to big. I don't want 40 mm stanchions.
ahhh but ull never break them
actually totems are known to blow seals

Posted: Oct 2, 2008 at 12:46 Quote
totems only blow seals when you dont maintain them... totems are high maintenance forks, stanchions and seals need to be lubed before every ride. internal lube (speed lube) needs to be changed every 30 hours and needs internal inspection and cleaning every 100 hours or so...if you just keep your seals lubed and moist, they wont blow out and they'll last longer...just take care of them and they'll take care of you.

Posted: Oct 2, 2008 at 12:50 Quote
webber123 wrote:
well if you want big forks....
photo

2029240


they are not set to 300mm

Posted: Oct 2, 2008 at 12:51 Quote
freeridermatt wrote:
webber123 wrote:
well if you want big forks....
photo

2029240


they are not set to 300mm

Who said they were...

Posted: Oct 2, 2008 at 12:53 Quote
Gaz6R4 wrote:
freeridermatt wrote:
webber123 wrote:
well if you want big forks....
photo

2029240


they are not set to 300mm

Who said they were...

Oh sorry lol, i thought they were super monsters

Posted: Oct 2, 2008 at 14:51 Quote
cruelty-and-the-beast wrote:
I use a .243FR for DH/FR i slapped a Totem on it with a 26' up front and 24' in the rear...Its very nimble and eager to rip anything i throw at it.
i thinking about rockshock domain 318

Posted: Oct 2, 2008 at 23:03 Quote
That'll be fine its a bit shorter than the totem isn't it?

Posted: Oct 3, 2008 at 7:24 Quote
im not shure i think the 318 is 160 and th 302 is 180 but the 318 got uturn

Posted: Oct 3, 2008 at 7:26 Quote
killerbikeman wrote:
im not shure i think the 318 is 160 and th 302 is 180 but the 318 got uturn

you can get either model in u-turn, if you choose not to have u-turn then the fork is 180, if you get u-turn i belive it is adjustable between 110 and 160? not to sure on the lowest Confused

Posted: Oct 3, 2008 at 7:31 Quote
downhilljoker wrote:
killerbikeman wrote:
im not shure i think the 318 is 160 and th 302 is 180 but the 318 got uturn

you can get either model in u-turn, if you choose not to have u-turn then the fork is 180, if you get u-turn i belive it is adjustable between 110 and 160? not to sure on the lowest Confused

Almost 115mm - 160mm

Posted: Oct 3, 2008 at 14:59 Quote
so wat shud i get 302 or 318 on my .243 fr ht

Posted: Oct 3, 2008 at 15:01 Quote
killerbikeman wrote:
im not shure i think the 318 is 160 and th 302 is 180 but the 318 got uturn

my 318 has 180 mm of travel, and no u-turn.. there is an opiton.


 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.018511
Mobile Version of Website