New fork for my dirt bike

PB Forum :: Dirt Jumping & Street
New fork for my dirt bike
  • Next Page
Author Message
flag BigRidah
Posted: Jun 28, 2009 at 20:06 Quote
100 % sure he is high.
flag deathwish
Posted: Jun 28, 2009 at 20:10 Quote
get a lowered marzocchi z1
flag reilly
FL
Posted: Jun 28, 2009 at 20:12 Quote
deathwish wrote:
get a lowered marzocchi z1
Ok, now I know he's high.
flag wildbrian
Posted: Jun 28, 2009 at 20:40 Quote
haha he already decided on the argyle anyways. . .
flag spskark7
Posted: Jun 28, 2009 at 20:45 Quote
wildbrian wrote:
haha he already decided on the argyle anyways. . .
yea but 1st i have to learn what hub i have...
i know use rst launch t8 what hub they need?
flag wildbrian
Posted: Jun 28, 2009 at 20:49 Quote
I'm pretty sure your hub is a 10mm quick release.
flag spskark7
Posted: Jun 28, 2009 at 20:53 Quote
wildbrian wrote:
I'm pretty sure your hub is a 10mm quick release.
its not quick reease...
flag reilly
FL
Posted: Jun 28, 2009 at 20:53 Quote
wildbrian wrote:
I'm pretty sure your hub is a 10mm quick release.
You mean 9mm?
flag wildbrian
Posted: Jun 28, 2009 at 20:55 Quote
Well there are 9mm and 10mm quick releases but I'm not sure what his is. . .and to spskark7:why don't you measure it?
flag spskark7
Posted: Jun 28, 2009 at 20:57 Quote
wildbrian wrote:
Well there are 9mm and 10mm quick releases but I'm not sure what his is. . .and to spskark7:why don't you measure it?
how?
what part of the hub should i measure?
flag wildbrian
Posted: Jun 28, 2009 at 21:01 Quote
Take your wheel off and measure the part of the hub where the hole is. There is a skewer in it, that is the qr thingy. Measure the hole top to bottom. It should be something like 9 or 10 mm. Don't forget to measure in mm.
flag spskark7
Posted: Jun 28, 2009 at 21:05 Quote
wildbrian wrote:
Take your wheel off and measure the part of the hub where the hole is. There is a skewer in it, that is the qr thingy. Measure the hole top to bottom. It should be something like 9 or 10 mm. Don't forget to measure in mm.
ok i will do it in 2-3 hours and i will tell u
flag Superbiker729
Posted: Jun 28, 2009 at 21:10 Quote
spskark7 wrote:
wildbrian wrote:
Take your wheel off and measure the part of the hub where the hole is. There is a skewer in it, that is the qr thingy. Measure the hole top to bottom. It should be something like 9 or 10 mm. Don't forget to measure in mm.
ok i will do it in 2-3 hours and i will tell u
9mm and 10mm are the same thing, sounds weird but it is actually measured in inches, by the companies, and 3/8 comes out to somewhere in between 9mm and 10mm, so some people say 9 and some say 10, there is no difference, they both fit the same axle.
flag spskark7
Posted: Jun 28, 2009 at 22:09 Quote
spskark7 wrote:
wildbrian wrote:
Take your wheel off and measure the part of the hub where the hole is. There is a skewer in it, that is the qr thingy. Measure the hole top to bottom. It should be something like 9 or 10 mm. Don't forget to measure in mm.
ok i will do it in 2-3 hours and i will tell u
F*CK!!
i need a new hub for the fork :p
show i am going to buy a new hub and rock shox 302 Frown
is 302 good ??
thx anyway for your help
  • Next Page

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv56 0.009784
Mobile Version of Website