Specialized Big Hit 2009 Builds

PB Forum :: Downhill
Specialized Big Hit 2009 Builds
Author Message
flag kirsty123
Posted: Jul 5, 2010 at 2:53 Quote
My bighit 3 build
- 2010 Rock Shox Boxxer Race]
- Fox DHX 5.0 with Ti Spring
- Avid Elixir 5
- Hope Floating Rotor
- RaceFace Atlas FR Bars(not in pic)
- Sunline Logo Thick Grips
- Truvativ Holzfeller Direct Mount Stem
- E13 LG1 Chain Device
- E13 Chainring (not in pic)
- FSA Gravity Gap Cranks
- Wellgo MG1 Pedals
- SDG i-Fly Seat
- SDG Micro i-Beam Post
- Syncros Rims on Stock Hubs
- Titanium Linkage Bolts
- All Other Bolts Ano Blue
- Rear Hope Skewer
photo
flag
Posted: Nov 23, 2010 at 12:22 Quote
sdcrash wrote:
photo

heres mine... lemmie know what you guys think, thanks


IS IT 2009 OR 2010???
flag sdcrash
Posted: Nov 23, 2010 at 12:32 Quote
james-h wrote:
sdcrash wrote:
photo

heres mine... lemmie know what you guys think, thanks


IS IT 2009 OR 2010???
its an 09.... but here's what it looks like now.....
flag
Posted: Nov 23, 2010 at 12:41 Quote
sdcrash wrote:
photo

niceeee
flag sdcrash
Posted: Nov 23, 2010 at 14:15 Quote
james-h wrote:
sdcrash wrote:
photo

niceeee
ha thanks dude
flag MTBxHESKETH
Posted: Dec 11, 2010 at 9:23 Quote
How did you fit them forks? are the actual forks tapered then coz the frame is? where can you buy tapered triple forks?

reply asap
flag ilikedh
Posted: Dec 11, 2010 at 9:52 Quote
MTBxHESKETH wrote:
How did you fit them forks? are the actual forks tapered then coz the frame is? where can you buy tapered triple forks?

reply asap


change headset
flag sdcrash
Posted: Dec 11, 2010 at 10:34 Quote
MTBxHESKETH wrote:
How did you fit them forks? are the actual forks tapered then coz the frame is? where can you buy tapered triple forks?

reply asap
yea its all in the headset. Its an 1 1/8th steerer. And I used an 1 1/8 top cup and a reduced ring in the bottom
flag MTBxHESKETH
Posted: Dec 11, 2010 at 10:38 Quote
sdcrash wrote:
MTBxHESKETH wrote:
How did you fit them forks? are the actual forks tapered then coz the frame is? where can you buy tapered triple forks?

reply asap
yea its all in the headset. Its an 1 1/8th steerer. And I used an 1 1/8 top cup and a reduced ring in the bottom


ok so you can put normal 1 1/8 forks in it?
flag ilikedh
Posted: Dec 11, 2010 at 17:29 Quote
MTBxHESKETH wrote:
sdcrash wrote:
MTBxHESKETH wrote:
How did you fit them forks? are the actual forks tapered then coz the frame is? where can you buy tapered triple forks?

reply asap
yea its all in the headset. Its an 1 1/8th steerer. And I used an 1 1/8 top cup and a reduced ring in the bottom


ok so you can put normal 1 1/8 forks in it?

if you change the headset yes
flag MTBxHESKETH
Posted: Dec 11, 2010 at 17:37 Quote
ilikedh wrote:
MTBxHESKETH wrote:
sdcrash wrote:
yea its all in the headset. Its an 1 1/8th steerer. And I used an 1 1/8 top cup and a reduced ring in the bottom


ok so you can put normal 1 1/8 forks in it?

if you change the headset yes

can u send a link to where i could buy a cheap headset to do this please?
flag ilikedh
Posted: Dec 11, 2010 at 17:55 Quote
MTBxHESKETH wrote:
ilikedh wrote:
MTBxHESKETH wrote:



ok so you can put normal 1 1/8 forks in it?

if you change the headset yes

can u send a link to where i could buy a cheap headset to do this please?

http://www.chainreactioncycles.com/Models.aspx?ModelID=25722

that would fit my bike,but it depends on your headtube size
flag sdcrash
Posted: Dec 11, 2010 at 18:04 Quote
ilikedh wrote:
MTBxHESKETH wrote:
ilikedh wrote:


if you change the headset yes

can u send a link to where i could buy a cheap headset to do this please?

http://www.chainreactioncycles.com/Models.aspx?ModelID=25722

that would fit my bike,but it depends on your headtube size
you could use the lower assembly... but if u have a new bighit w a tapered headtube ud need the upper assembly of a standard 1 1/8 headset

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv42 0.016713
Mobile Version of Website