Stanton Bikes Slackline release

“The Slackline is a multipurpose frame that is designed to reward style while riding hard in all conditions. The snap, acceleration and berm hugging cornering comes from our low bottom bracket and short chain stays. Couple this with a tight, nimble geometry and slack angles; you have a versatile “bomb proof frame. Frame only price is £400”.


The Slackline features:

Double butted, seamless, air hardening, heat treated Reynolds 853 main tubes
Cold worked Reynolds 525 seat and chain stays
Generic replaceable mech hanger
Custom lazer cut 7mm thick dropouts
I.S.C.G 05 mounts
Gusseted down tube
73mm bottom bracket shell
Pewter head badge
Under lacquer graphics
Stove enamelled paint


Geometry reads:

Head angle 68 degrees
Seat angle 72 degrees
Seat tube length 16.5” and 18”
Top tube 22” on the 16.5” frame and 23 on the 18” frame
Chain stay length 16.3”
Bottom bracket height 12.4”
All of the measurements are taken with a 140mm travel fork at 25% sag


Check them out HERE;

www.StantonBikes.com

They are now taking orders worldwide!


Thanks,

Tom Gaffney

www.flickr.com/thomasgaffney

Posted In:
Stories Reader Stories Stanton Bikes