Marquette, Michigan
yukonrider: Bikes in: Bikes - All Mountain/Enduro
296 views
438 views | 1 comments
Perkinsville, Vermont
unissamog: Carbon-bike-project in: Bikes - All Mountain/Enduro
241 views
comparison w/o hanger.
248 views
Comparing my dropout to Cannondale's carbon swingarm dropout.
218 views
comparing my dropout to it's factory aluminum brother
189 views
checking the fit of the der. hanger
168 views
dropout blanks. Aluminum core, fiberglass coat, and several uni and woven layers of carbon fiber.
215 views
beginnings of the rear end.
223 views
clamping the curing dropout blanks.
209 views
other side
212 views
a bit of mockup and measuring.
230 views
Carbon all over!! and the 1st install of the seatpost.
204 views
sanding, and removal of a large wrinkle, exposing core.
184 views
closeup of compression wrap near BB
192 views
sanding down before a 2nd layer.
201 views
closeup of uni directional fabric
2 rolls of unidirectional carbon and one of weave. most of the frame will be unidirectional fabric in varying angles.
199 views
Checking it out with a possible fork.
213 views
cured shot of 1st tubes.
193 views
epoxy weep.
1st layers on the top and down tubes.
200 views
Doing mockup and a few measurements for the rear end.
187 views
About Us
Advertise
Cool Features
RSS