layouter
← Back to profile
Albums:
- Favorites
- 0 All Photos
- 1 Mobile Uploads
- 2096378 Project-Thaw--Parts--Mockups
- 2096367 Late-26-AM--Thawed-in-2026
All Photos (15 Photos)
Click to select an image. Click and drag to select multiple images. Shift+click to add/remove from your selection.
Upload Photos-
-
FUKUOKA layouter: Late-26-AM--Thawed-in-2026
in: Bikes - All Mountain/Enduro16 views
MATTS Sports 700 in its completed goal state. (tail light was the only part not fitted on this day.)
-
FUKUOKA layouter: Late-26-AM--Thawed-in-2026
in: Bikes - All Mountain/Enduro17 views
MATTS Sports 700 in its completed goal state. (tail light was the only part not fitted on this day.)
-
FUKUOKA layouter: Late-26-AM--Thawed-in-2026
in: Bikes - All Mountain/Enduro21 views
MATTS Sports 700 in its completed goal state. (tail light was the only part not fitted on this day.)
-
FUKUOKA layouter: Project-Thaw--Parts--Mockups
in: Parts - Other17 views
CATEYE AMPP300N Celeste+CATEYE RAPID3 Celeste
-
FUKUOKA layouter: Project-Thaw--Parts--Mockups
in: Parts - Other15 views
After the wheel rebuild, built by a local bike shop. Rim: Sun Ringlé MTX33 Purple Hub : XC 15mm front hub H600100 R9.1 Gold Spokes: FIREEYE 14G White Nipples: Brass
-
FUKUOKA layouter: Project-Thaw--Parts--Mockups
in: Parts - Other7 views
After disassembly for the wheel rebuild. Only the background has been cleaned up with AI; the wheel itself is shown as-is.
-
FUKUOKA layouter: Project-Thaw--Parts--Mockups
in: Parts - Other10 views
Before disassembly for the wheel rebuild. Only the background has been cleaned up with AI; the wheel itself is shown as-is.
-
FUKUOKA layouter: Project-Thaw--Parts--Mockups
in: Parts - Other10 views
CATEYE AMPP300N Light O/H.
-
FUKUOKA layouter: Project-Thaw--Parts--Mockups
in: Parts - Other8 views
Comparison of the previous and current main-stems. ROVE XC 110 mm / ROVE AM 80 mm.
-
FUKUOKA layouter: Project-Thaw--Parts--Mockups
in: Parts - Other12 views
Sun Ringlé MTX33 Purple after arrival. Only the background has been cleaned up with AI; the rim itself is shown as-is. A rare 26" DH / freeride rim in this era, and a key piece for the late-26" all-mountain rebuild.
-
FUKUOKA layouter: Project-Thaw--Parts--Mockups
in: Parts - Other12 views
ROVE XC 110㎜ → ROVE AM 80 mm. Paired with an Answer A-TAC head cap, the cockpit now carries a clearer late-26" trail / all-mountain character.
-
FUKUOKA layouter: Project-Thaw--Parts--Mockups
in: Bikes - All Mountain/Enduro17 views
AI-assisted front rim mockup over a real photo. The actual purple rim is on its way. If it lands like this, MATTS is finally complete.
-
FUKUOKA layouter: Project-Thaw--Parts--Mockups
in: Bikes - All Mountain/Enduro22 views
just a temporary front-end mockup. 26 × 2.4 on the SHAN27, with a 140mm FOX32 for now. Lower than the proper 160mm plan, but good enough to check stance and tyre clearance. Promising.
-
FUKUOKA layouter: Late-26-AM--Thawed-in-2026
in: Bikes - All Mountain/Enduro43 views
A 2005 Merida MATTS 700 built around late-26” all-mountain parts culture, frozen around 2013 and restarted in 2026.
|