microfiz
← Back to profile
Albums:
- Favorites
- 0 All Photos
- 1811200 Mobile Uploads
- 1914645 2015-Cannondale-Rush-Downcountry
- 1737072 2017-Giant-Trance-the-backup
- 1732362 Cheater-Bike
- 1639680 2018-Cannondale-Jekyll-Carbon-1
- 1587772 Jaguar
- 1583996 GT-Zaskar
- 1556867 SInister
- 1553775 Buysell
- 1445456 Fit-BMX
- 1287300 Nissan-Poohfinder
- 1140482 Bottlerocket
- 1138594 Misc
- 940549 Turner-DHR
- 849577 Heckler
- 741372 my-buysell-items
- 696672 Microfiz
- 696671 Van-Life-Not
All Photos (219 Photos)
Click to select an image. Click and drag to select multiple images. Shift+click to add/remove from your selection.
Upload Photos-
Alameda, California microfiz: Cheater-Bike
in: Bikes - All Mountain/Enduro57 views
Ugh. Not a fan of Fox suspension but here we are. Factory Fox 38, $250 brand new from Jenson (27.5... that's why). Factory Fox Float X2 (factory replacement for an OEM X2 that failed for damper cavitation). Factory Transfer post ($150... also Jenson because it's only 100mm drop... I have short legs and a small bike).
-
-
-
-
-
-
-
-
Alameda, California microfiz: Cheater-Bike
in: All Mountain/Enduro89 views
Remote died. Decided to do a full rebuild and paint strip/polish.
-
Alameda, California microfiz: Cheater-Bike
in: All Mountain/Enduro137 views
Everything removed but the frame.
-
-
Alameda, California microfiz: Cheater-Bike
in: All Mountain/Enduro136 views
320, 600, 1000 and then polishing wheel. That's it.
-
Alameda, California microfiz: Cheater-Bike
in: All Mountain/Enduro199 views
FInished product. Tucking the harnesses was a pain in the ass.
-
Alameda, California microfiz: Cheater-Bike
in: All Mountain/Enduro147 views
FInished product. Tucking the harnesses was a pain in the ass.
-
Alameda, California microfiz: Cheater-Bike
in: All Mountain/Enduro151 views
FInished product. Tucking the harnesses was a pain in the ass.
-
Alameda, California microfiz: 2015-Cannondale-Rush-Downcountry
in: Bikes - XC112 views | 1 faves
1) RS Yari/Lyrik fork with McGyver-ed air shaft (cut 160 air shaft to 120). Charger damper makes this a Lyrik fork. 2) 1X12 drivetrain (Shimano XT rear derailleur, Amazon special cassette, Ebay special cranks) 3) WTB volt saddle 4) CB Stamp clone pedals 5) boost Roval front wheel 6) Tony's Minion DHF (thanks!) 7) 760 bar/50mm stem from ebike 8) dropper post The only carry-over from the shitbike is the frame, shock, rear wheel (and tire), and brakes. Everything else is new ($20 pedals, $30 I-spec brackets, about $20 of hardware) or from my spare parts bin. HA measures at 67.5 degrees (longer travel fork, higher volume tire). Let's see if I like this before considering an angleset. Weight dropped from 33.3 lbs to 31 lbs (even with dropper post). This is officially my first 29er.
-
Alameda, California microfiz: 2015-Cannondale-Rush-Downcountry
in: Bikes - XC78 views
4-5X application of paint stripper. Cannondale sandblasted the surface for better adhesion. Also took time to sand down that surface. This is after 10 hrs (?) of work.
-
-
Alameda, California microfiz: 2015-Cannondale-Rush-Downcountry
in: Bikes - XC83 views
$240 clapped out bike... shitty ass fork, rusted chain, dents in the downtube. Seller wanted $400, I balked when I saw and offered $240 hoping he'd say no. And here we are.
-
-
-
-
-
