2014 Industry Nine Torch Enduro 29

Selling my 2014 I9 wheel set, hubs and spokes used on a Niner RIP 9, Lenz Lunchbox, and very briefly on a CB Nimble 9 for a total of about 1500 miles. Hubs serviced about 500 miles ago.

Original, narrower "Trail" rims were replaced about 200 miles ago with the I9 "Enduro" rim which measures 31.5mm outer/26mm inner diameter. One ding on rear drive side (see picture) which has no effect on the ability to hold air. I9's website says this set is 1780g, which is pretty damn light for how strong they are. Outside of relacing/retensioning when I swapped rims, I never had to true either wheel.

Hub configuration is currently 142x12, 100x15, XD driver. I have one set of QR endcaps, and a 10 speed freehub that I'll include if you specifiy.

This would be a really good wheel set for everything from a AM hardtail (EPO) to a new school low/slack short travel FS (Following, Phantom, etc.) to a full-on 6+" bike (Enduro, Wreckoning, WFO, etc.).

I have a number of 29er tires with good tread left, listed in order from highest to lowest volume, without respect to manufacturer spec. Pick 2:
2.5 Maxxis Minion DHF (3C, EXO, TR) 8/10
2.4 Maxxis Ardent (EXO, TR) 9.5/10 - two rides
2.3 On-One Chunky Monkey (same casing as 2.4 Ardent, great tire) 7/10
2.35 Maxxis Ikon (3C MaxxSpeed, TR) 7/10
2.3 Specialized Slaughter (Grid) 7/10
2.25 Maxxis Ardent (3C, TR) 7/10
2.2 Specialized Purgatory (Control) 9/10
2.2 Specialized Ground Control (Control) 9/10