X01/XX1 cassette stuck on freehub

PB Forum :: SRAM
X01/XX1 cassette stuck on freehub
  • Previous Page
  • Next Page
Author Message
flag stubestrong
Posted: Nov 12, 2014 at 6:46 Quote
as the title goes,

being told by some this is becoming a common issue, over greased thread shaft etc when installing to avoid this problem.

even the lockring splines has sheared off :/
looks like its another sram warranty again

any tricks out there to remove cassette without cutting it off, bit off a killer with less then 50% wear?!
flag n-d-p
Posted: Mar 24, 2015 at 21:14 Quote
enduroFactory wrote:
as the title goes,

being told by some this is becoming a common issue, over greased thread shaft etc when installing to avoid this problem.

even the lockring splines has sheared off :/
looks like its another sram warranty again

any tricks out there to remove cassette without cutting it off, bit off a killer with less then 50% wear?!


There are several problems with removing the cassette. You may find this article is relevant:

http://hamfistedcyclist.blogspot.com/2013/12/sram-xx1-certain-amount-of-fail.html
flag stubestrong
Posted: Mar 25, 2015 at 0:37 Quote
I just send the freehub and cassette to sram.

They send me a cassette I buy a freehub.

Works out cheaper then a cassette which actually comes off.

£70 vs £180
  • Previous Page
  • Next Page

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv56 0.008359
Mobile Version of Website