Sam-J

Hi, I'm selling my Yeti SB100. The bike is in great shape and ready to ride. This is a custom build with the goal of creating a very efficient and durable trail bike that can perform well over any terrain during longer rides. The build was completed by Sunnyside Sports in Bend. This is a Turq frame with Fox Factory suspension and Shimano XT parts. The fork is a 130mm Fox 34 with 44mm offset. This fork was purchased as a 140mm travel fork and a 130mm air shaft was installed, but I have both air shafts if you want them. Below are some comments on the bike's condition and a list of parts. Feel free to ask questions! Maintenance and Condition This bike has been serviced regularly at Sunnyside Sports and everything is in excellent working order. The suspension, drivetrain, and brakes have just been serviced. Once I prep a bike for sale I don't ride it anymore - so that way it's clean, serviced, and ready for its next owner. Some areas of the frame are strategically covered with ISC Racer Tape. However, there are a couple of spots that have small, superficial, rock strikes that have chipped the paint. But overall everything is in very good shape. Transaction Info Seller to pay for shipping (up to $200) and transaction fees on full price offers only. A credit of $250 will be given for local pickup with a cash transaction. Any transaction that requires shipping will be conducted via Paypal to a registered address. Build Spec Frame - TURQ Series carbon fiber frame, Switch Infinity suspension technology, press-fit BB92, fully enclosed internal cable routing, 148mm x 12mm BOOST dropouts, sealed Enduro Max pivot bearings, integrated derailleur hanger, and axle. Headset - Cane Creek 40 Fork - Fox Factory 34, 130mm travel, 44mm offset, FIT4 Damper Rear Shock - Fox Factory DPS, 190mm x 37.5mm Seat Post - Crankbrothers Highline 30.9mm 165mm travel Wheels – Crankbrothers Iodine 29 (28mm internal width) Tires - Front: Maxxis Dissector 29 x 2.4 Rear: Maxxis Rekon 29 x 2.4 Brakes - Shimano XT 2 piston, 200mm/180mm rotors Bottom Bracket - Shimano XT Chain - Shimano XT 11 Speed Chainring - Shimano XT 30T 11 Speed Crankset - Shimano XT Cassette - Shimano XT 11 Speed 11-46 Shifters - Shimano XT 11 Speed Rear Derailleur - Shimano XT 11 Speed Handlebars - Race Face Atlas 800mm wide, 20mm rise, 35mm clamp Stem - Race Face Turbine 35mm clamp, 32mm length Grips - ODI Saddle - SDG Circuit Ti-Alloy Pedals - This bike is not being sold with pedals

Hi, I'm selling my Yeti SB100. The bike is in great shape and ready to ride. This is a custom build with the goal of creating a very efficient and durable trail bike that can perform well over any terrain during longer rides. The build was completed by Sunnyside Sports in Bend. This is a Turq frame with Fox Factory suspension and Shimano XT parts. The fork is a 130mm Fox 34 with 44mm offset. This fork was purchased as a 140mm travel fork and a 130mm air shaft was installed, but I have both air shafts if you want them. Below are some comments on the bike's condition and a list of parts. Feel free to ask questions! Maintenance and Condition This bike has been serviced regularly at Sunnyside Sports and everything is in excellent working order. The suspension, drivetrain, and brakes have just been serviced. Once I prep a bike for sale I don't ride it anymore - so that way it's clean, serviced, and ready for its next owner. Some areas of the frame are strategically covered with ISC Racer Tape. However, there are a couple of spots that have small, superficial, rock strikes that have chipped the paint. But overall everything is in very good shape. Transaction Info Seller to pay for shipping (up to $200) and transaction fees on full price offers only. A credit of $250 will be given for local pickup with a cash transaction. Any transaction that requires shipping will be conducted via Paypal to a registered address. Build Spec Frame - TURQ Series carbon fiber frame, Switch Infinity suspension technology, press-fit BB92, fully enclosed internal cable routing, 148mm x 12mm BOOST dropouts, sealed Enduro Max pivot bearings, integrated derailleur hanger, and axle. Headset - Cane Creek 40 Fork - Fox Factory 34, 130mm travel, 44mm offset, FIT4 Damper Rear Shock - Fox Factory DPS, 190mm x 37.5mm Seat Post - Crankbrothers Highline 30.9mm 165mm travel Wheels – Crankbrothers Iodine 29 (28mm internal width) Tires - Front: Maxxis Dissector 29 x 2.4 Rear: Maxxis Rekon 29 x 2.4 Brakes - Shimano XT 2 piston, 200mm/180mm rotors Bottom Bracket - Shimano XT Chain - Shimano XT 11 Speed Chainring - Shimano XT 30T 11 Speed Crankset - Shimano XT Cassette - Shimano XT 11 Speed 11-46 Shifters - Shimano XT 11 Speed Rear Derailleur - Shimano XT 11 Speed Handlebars - Race Face Atlas 800mm wide, 20mm rise, 35mm clamp Stem - Race Face Turbine 35mm clamp, 32mm length Grips - ODI Saddle - SDG Circuit Ti-Alloy Pedals - This bike is not being sold with pedals

This shock has been used 2 or 3 times total. It’s in excellent condition, and works perfectly. I have two of the lightweight Vault springs to go with it 650lbs and 550lbs.