tripleO

2016 Specialized Stumpjumper comp for sale. This bike has been very well looked after and the proof is in the pictures. With the exception of the usual wear and tear you would expect from a bike, it is in very good working order and all runs smoothly. Its recently been serviced and has several brand new parts which I'll list down below. Spec; 2016 Specialized Stumpjumper comp (medium) Fork - Rockshox revelation 150mm Shock - Fox float evloution CTD - 150mm Brakes - Hope tech 3 (203mm front rotor and 180mm rear) Wheels - Specialized roval wheels Tyres - Specialized butcher front Specialized purgatory rear Seatpost - Specialized command dropper Along with these parts it also has a brand new sram cassette, chain and nukeproof lock on grips. Any questions feel free to message me. Open to very sensible offers only.

Here is my 2021 Yeti SB150 turq custom build in medium. This bike has been built from the frame up and is a very high spec. It has had Invisiframe from new with only a couple of marks on it. The bike has very recently had a full strip down service, including a new bottom bracket, chain, pivot/frame and hub bearings, switch infinity link service, fork lower leg service and brake bleed. The brakes, saddle and pedals are also brand new. The spec is as follows; Frame - Medium Yeti SB150 turq with NEW bearings Shock - Fox factory float X2 Fork - Rockshox lyrik ultimate 170mm Rims - Stans flow MK3 Hubs - Industry nine hydra classics red with NEW bearings Tyres - Front, Maxxis minnion DHF Rear, Maxxis minnion DHRII Tyre inserts - Cushcore pro Brakes - Sram codes BRAND NEW Rotors - Sram centreline 200 Handlebars - Burgtec ride wide Grips - Burgtec bartender pro, greg minnar edition Stem - Nukeproof horizon 35mm Seatpost - Oneup components V2 dropper 150mm Saddle - Fizik terra BRAND NEW Pedals - HT components composites BRAND NEW Cranks - Sram X01 Carbon Cassette - Sram X01 12 speed Chain - Sram X01 12 speed BRAND NEW Derailleur - Sram GX AXS Shifter - Sram GX AXS As shown in the photos this bike is in immaculate condition all bar one mark on the right seat stay, this is only a paint chip and is purely cosmetic. It has been checked by my local bike shop (who are a yeti dealership) and has since been fitted with new invisiframe. Any questions feel free to message me. I am open to very sensible offers only.

Open to offers. This is my custom 2018 Santa Cruz Bronson CC in Large (I'm 5'9 and this bike has been an okay size for me). The frame has had INVISIFRAME fitted by a bike shop from new. The bike overall is in excellent condition with only the odd mark on the INVISIFRAME, not on the bike or frame itself. New brake pads and chain fitted recently too. Specifications; Frame: Santa Cruz Bronson CC 2018 (Large) Fork: Rock Shox Pike 160mm Rear Shock: FOX Float Factory DPX2 150mm Wheels: Hunt Trailwide BOOST 27.5" (Shimano 11spd Freehub) Tyres: Maxxis Minion DHF 2.5wt front, Maxxis Minion DHR2 2.4wt rear Brakes: Hope Tech 3 E4 Front brake (203mm Hope floating rotor), Hope Tech 3 X2 Rear Brake (180mm Hope floating rotor) Gear Shifter: Shimano XTR 11spd Rear Derailleur: Shimano XT 11spd Cassette: Shimano 11-42 teeth Crankset: Shimano XT BOOST Chainring: OneUp Components 32t Bottom Bracket: Hope 68/73mm Handlebars: Renthal Fatbar Carbon (780mm width, 35mm clamp) Stem: Rental Apex (40mm length, 35mm clamp) Grips: DMR Deathgrip Headset: Cane Creek 40 series Seatpost: FOX Transfer Performance Elite 125mm drop Saddle: Fabric Radius Pedals not included If you have any questions or if there is anything else you'd like to know, please ask.

I’m reluctantly selling my 2016 Transition Patrol carbon which has been built from the frame up. The bike has been well looked after and is in good working order. The frame was wrapped in ‘invisiframe’ protection from new. It has a few minor scratch marks and paint chips in the common areas (around the bottom bracket and rear end) but absolutely no cracks or dents, all of which can be seen in the pictures. However the ‘invisiframe’ has done its job in preventing extra damage. Spec: Patrol carbon frame Fox Float X2 shock - 155mm (recently serviced by TFtuned) Fox factory 36 fork - 160mm Fox factory transfer dropper post W/ Wolf tooth light action lever - 125mm (recently serviced by silverfish including a brand new shaft and seals) Fabric scoop saddle Hope headset Hope 35mm stem Race face sixC carbon bars - 770mm wide DMR death grips Shimano Zee 4 piston brakes W/ ice tech floating rotors 200mm front, 180mm back (titanium rotor bolts) Shimano XT 1x11 drivetrain W/ 32t chainring Superstar nano tech pedals Hope tech 35W enduro rims laced to Hope pro 4 hubs Maxxis minion DHF FRONT Maxxis minion DHR II REAR With this spec I will only be accepting sensible offers. I am willing to travel locally (meet part way) if the buyer is genuinely interested.

This is my 2017 Hoy Alto Irpavi 004 with Ultegra groupset. I’m only selling this due to the fact that it doesn’t get much use and I would rather see it go to someone that will get the most out of it. This bike has only been ridden a handful of times and this shows, the bike is in great condition. Specifications: Frame - HOY 6066 heat treated aluminium Fork - Full carbon, tapered steerer Front Derailleur - Shimano Ultegra 6800 Rear Derailleur - Shimano Ultegra 6800 Number of Gears - 22 Shifters - Shimano RS-685 Chain set - Shimano Ultegra 6800 Chain rings - 50/34 Bottom Bracket - Shimano Hollowtech 68mm Cassette - Shimano CS-5800 11-28t Chain - KMC X11L Pedals - Shimano R550 Brakeset - Shimano RS-805 hydraulic disc brakes, flat mount, Shimano RT-99 Rotors, 140mm Handlebars - HOY semi-compact 6061 butted, 420mm Stem - HOY 3D forged, 31.8mm clamp, 100mm Headset - FSA Orbit C-40-ACB, No.42 Grips - HOY microfiber with vex gel padding Wheelset - Novatec CXD clincher, 15mm front through axle, 12mm rear through axle, sealed bearing, centerlock Spokes - 28 Front Tyre - Continental Grand Sport Race, 700x25c Rear Tyre - Continental Grand Sport Race, 700x25c Saddle - Specialized Phenom Titanium Rail Seatpost - HOY twin bolt 350mm

This is my Canyon Spectral AL 6.0 EX 2017. This bike is up for sale due to the fact it will be replaced by a custom build (something that I've been wanting to do for a while!). The bike has had some use but has had good servicing in return. A few cosmetic marks and slight cable rub on the fork crown are all visible in the uploaded photos. Completely stock apart from the Nukeproof Horizon pedals and Maxxis Shorty front tire. The Sram Guide R brakes have had one ride so they will still need to be bedded in! Specifications are as follows: Fork: Rock Shox Pike RC 150mm Rear shock: Rock Shox Monarch RT 140mm Handlebar: Raceface Aeffect 760mm Stem: Raceface Aeffect 35mm clamp Grips: Ergon GE10 Slim Brakes: Sram Guide R w/ 200mm front rotor and 180mm rear rotor Shifters: Sram GX Derailleur: Sram GX Crankset: Raceface Turbine Direct mount w/ 30t Raceface Narrow wide chainring Bottom Bracket: Sram GXP press fit Cassette: Sram XG-1150 10-42t 11 speed Tires: Maxxis Shorty 2.4 front, Maxxis Minion SS 2.3 rear Seatpost: Rock Shox Reverb Stealth 125mm Saddle: SDG Circuit Wheels: DT Swiss M1700 Spline w/ 15 x 100mm front hub, 12 x 142mm rear hub Pedals: Nukeproof Horizon