Video player is disabled while the embed window is open.
Copy and paste the HTML code below:
Color:
Size: X
|
| |
Fox 831 Video
Mark Fitzsimmons talking about Fox's new 831.
13 Comments
- + 0
If someone wanted to couldnt they just make a sleeve over the 15mm axle to turn into 20mm? the only issue i could see would be tire clearance but you could do it with the right tire
- + 3
your stupid, the rim isn t going to change size because of your axle size. your spokes are longer, or the flanges are a little bigger.
- + 0
a 15mm axle hub is going to be smaller than a 20mm axle hub and the flanges are probably going to be different sizes and since this fork is meant for a 15mm axle...you can do the rest
- + 1
It wouldnt make a difference regardless.. doesnt make a difference on none 20mm axel hubs you can use the same tire with 9mm quick release or 20mm.. they obviously engineered it properly.. soo think before you post
Thats wayyyyyyy off from the competitor prices.
Again, I understand its Fox, and they make an amazing fork, but $$831 is just too expensive for who they are trying to target, especially since its an amped up Fseries.