2016 Yeti SB6c XO1 build medium

My Yeti SB6 is up for grabs. I purchased it brand new in March 2016. It is the stock XO1 build for 2016, size medium. The only changes are the grips, tires, and cutting the bars from 800mm down to 780mm.

I just updated the ad with detailed photos of the bike that were taken on 2/12/17. I will not be riding the bike until it sells, so this is the condition you can expect to receive the bike in. All the parts are mechanically sound and functioning properly. There is normal wear and tear from one season of riding but overall this bike is in great condition.

All damage is purely cosmetic and can be seen somewhere in these photos. There is no structural damage to the frame or any of the components. The bottom bracket area has a scrape from a rock, as well as a small crack in the paint near the ISCG tab. I had my Yeti dealer inspect the whole frame and they verified this is only a paint crack.

The damage you see on the down tube is only the plastic protective film. The frame itself is in great shape in this area with only minor scuffing. It looks bad because anytime the protective film was scraped I simply layered over the top of it with more film. Same goes for the bottom bracket area, it's covered by multiple pieces of clear protective film that has become dirty. Looks bad, but frame is in good shape underneath the protective film other than the visible scrape. I'll probably remove the protective film all together and take updated photos.

I'm selling this bike because I bought a lighter duty trail bike, a Hightower, and cannot keep both bikes. I have loved this SB6 and the ride quality is second to none. I'm open to reasonable offers.

Buyer pays shipping.




Rear Shock: FOX Float X Factory DPS
Rear Travel: 152 mm
Fork: FOX 36 Float Factory FIT4
Front Travel: 160 mm
Headset: 44 x 56 mm Cane Creek 40 series
Shifters: SRAM X01
Rear Derailleur: SRAM X01
ISCG Tabs: ISCG 05
Crankset: 30 t Race Face Turbine
Bottom Bracket: Race Face Cinch PressFit 92
Cassette: 10 - 42 t SRAM XG 1180
Chain: SRAM PC 1130
Brakeset: SRAM Guide RSC
Rotors: 180 / 180 mm SRAM Centerline
Handlebar: Easton Havoc 35
Handlebar Width: 780 mm
Grips: Ergon GE1
Stem: Easton Havoc 35
Stem Length: 50 mm
Saddle: WTB Yeti
Seatpost: RockShox Reverb 30.9 x 125mm drop
Wheelset: [rims] DT Swiss EX471
Hubs: DT Swiss 350
Front Axle: 15 x 100mm
Rear Axle: 12 x 148mm Boost
Tires: Front: Minion DHF WT 2.5 Rear: Minion SS 2.35
Weight: 28.7 lbs