brockley

Selling a 2018 Hightower CC Large complete bike with a mix of components. In good condition, some scrapes from normal riding and shuttling that I included in the pictures. Top tube has some touch up paint on it, and theres some tire rub on the inside of the stays. No frame damage, bike runs smooth mechanically. Shock rebuilt within last 5 rides by Suspension Syndicate. Will service fork lowers before shipping. Fresh SRAM Code R brakes and rotors. Just pulled old helicopter tape off and put a fresh layer on. Buyer pays shipping $100 anywhere in USA. 150mm front travel 2017 Rockshox Pike RCT3 fork 135mm VPP rear travel Cane Creek DB Inline Coil rear shock (includes Rockshox Monarch air shock too) SRAM X1 Carbon cranks 32t steel chainring GX Eagle derailleur, chain, cassette XO1 Eagle shifter Like-new SRAM Code R brakes with fresh SRAM 200/180mm rotors ENVE DH carbon bars 31.8 x 780mm Deity Cavity Stem 50mm OneUp 170mm dropper OneUp Loam dropper lever Like-new Sensus Dissisdaboss Lacondeguy signature grips Ergon SME3 Pro saddle E.13 TRS Boost aluminum wheels, TRSr hubs Vittoria martello 4C Enduro 29 x 2.35in tires

This is a 2017 Santa Cruz Hightower Carbon S build, C level carbon, size medium. It was purchased as the stock 27.5+ S build with a 150mm fork. Ridden for 1 year by my wife. It has some scratches/scrapes most of which is shown in the photos. Otherwise the bike is in great shape. Most sellers claim this but the bike has truly been well-maintained mechanically. Comes ready to ride with no issues. Buyer pays shipping which is $100 packaged and shipped by a bike shop. PayPay only for payment. Open to reasonable offers. The bike includes two wheelsets: 29" Raceface Aeffect R with Minion DHF 2.5” front and DHR 2.3” rear 27.5+ Raceface AR40, Novatec hubs with Rekon 2.8” front and rear (stock wheelset) The bike was upgraded with a Santa Cruz 760mm carbon riser bar and XT M8000 brakes. It includes the stock 780mm aluminum handlebar. Frame Material Details Carbon C with Double Sealed Pivots and Internal Carbon Tube Routing of Derailleur and Seat Post Cables Rear Travel 135mm Rear Shock RockShox Monarch RT Fork RockShox Pike RC Solo Air Fork Travel 150mm Head Tube Diameter Tapered Headset Cane Creek 40, Integrated Handlebar Santa Cruz 760 carbon riser, Raceface Flat Wide 780mm aluminum bar also included Stem Race Face Turbine basic 35mm clamp Grips Santa Cruz Palmdale Lock-on Brakes Shimano XT M8000 with 180mm Centerline rotors Shifters SRAM GX Rear Derailleur SRAM GX 1x11 Cranks Race Face Aeffect AL Chainrings 30 Tooth Bottom Bracket Raceface BSA Pedals Deity Decoy Chain SRAM PC1130 Cassette SRAM XG1150 10-42 Tooth Wheelset: see above Saddle WTB Volt Race Seatpost RockShox Reverb Stealth B1 31.6x150mm

My Yeti SB6 is up for grabs. I purchased it brand new in March 2016. It is the stock XO1 build for 2016, size medium. The only changes are the grips, tires, and cutting the bars from 800mm down to 780mm. I just updated the ad with detailed photos of the bike that were taken on 2/12/17. I will not be riding the bike until it sells, so this is the condition you can expect to receive the bike in. All the parts are mechanically sound and functioning properly. There is normal wear and tear from one season of riding but overall this bike is in great condition. All damage is purely cosmetic and can be seen somewhere in these photos. There is no structural damage to the frame or any of the components. The bottom bracket area has a scrape from a rock, as well as a small crack in the paint near the ISCG tab. I had my Yeti dealer inspect the whole frame and they verified this is only a paint crack. The damage you see on the down tube is only the plastic protective film. The frame itself is in great shape in this area with only minor scuffing. It looks bad because anytime the protective film was scraped I simply layered over the top of it with more film. Same goes for the bottom bracket area, it's covered by multiple pieces of clear protective film that has become dirty. Looks bad, but frame is in good shape underneath the protective film other than the visible scrape. I'll probably remove the protective film all together and take updated photos. I'm selling this bike because I bought a lighter duty trail bike, a Hightower, and cannot keep both bikes. I have loved this SB6 and the ride quality is second to none. I'm open to reasonable offers. Buyer pays shipping. Rear Shock: FOX Float X Factory DPS Rear Travel: 152 mm Fork: FOX 36 Float Factory FIT4 Front Travel: 160 mm Headset: 44 x 56 mm Cane Creek 40 series Shifters: SRAM X01 Rear Derailleur: SRAM X01 ISCG Tabs: ISCG 05 Crankset: 30 t Race Face Turbine Bottom Bracket: Race Face Cinch PressFit 92 Cassette: 10 - 42 t SRAM XG 1180 Chain: SRAM PC 1130 Brakeset: SRAM Guide RSC Rotors: 180 / 180 mm SRAM Centerline Handlebar: Easton Havoc 35 Handlebar Width: 780 mm Grips: Ergon GE1 Stem: Easton Havoc 35 Stem Length: 50 mm Saddle: WTB Yeti Seatpost: RockShox Reverb 30.9 x 125mm drop Wheelset: [rims] DT Swiss EX471 Hubs: DT Swiss 350 Front Axle: 15 x 100mm Rear Axle: 12 x 148mm Boost Tires: Front: Minion DHF WT 2.5 Rear: Minion SS 2.35 Weight: 28.7 lbs