2015 cotic bfe frame large

cotic bfe large frame black grape colour.
31.6 seat post.
head tube fits 1 1/8 or tapered steerer with correct headset. It has a 1 1/8 fitted currently.
73mm bottom bracket
Built this bike from new frame mid 2015 and only used it for about 6 months (6 or 7 rides at cannock).
then a disc in my back went and have not been able to ride since.
I wrapped the frame from new in heli tape, made full patterns for near enough entire frame, so it is not just bits of tape stuck here and there. If you zoom in , you wheel see how good the fit is.
Fitted are a new (when built) xt m786 2x10 front mech . left it on as were it fits frame it as slightly lifted the tape.
Also (new when built) nukeproof warhead 44 iess headset for 1 1/8 steerer.
With a different bottom bearing ,you can fit tapered forks also.
There are only 2 tiny marks on it caused from a couple of screwdrivers falling of shelf when i banged my head on it. Think they would have been chips if not for the heli wrap.
they roughly measure about 3- 4mm and as wide as a screwdrive blade.

specs are here:- http://www.cotic.co.uk/product/classic_BFe26#compatibility