2018 Pole Evolink V1.3 158 / 176

Bike is in great shape, ready to ride. The chainstay on one side had touch-up paint and 3M protective wrap put on (4th pic). The other side has some paint chipping from chain slap. No structural issues, only aesthetic. Bike has 176mm rear travel in this configuration since the shock is a 222x70mm with offset bushings to make the eye-to-eye 218mm. 2mm difference (from a stock shock of 216mm) raises the BB by 5mm and steepens the STA and HTA by 0.5 degree, but the 27.5 rear wheel counteracts the effect by dropping the BB 11mm and slackening the HTA and STA by 1 degree. In stock form the BB is actually too high to begin with. Bike comes with rear axle dropouts for both 148mm (installed) and 142mm if you want to run a rear wheel that isn’t boost. Pole bikes run very large, I'm 6' and thought it was an ideal fit.

Specs -
Fork: Lyrik RC2 170mm
Shock: Fox DHX RC4
Handlebar: Answer/ProTaper Carbon cut down to 790mm (less than 200 grams)
Stem: ZTTO 45mm (new)
Brakes: SRAM Code RSC w/ 200mm rotors
Shifter: Shimano Deore M5100 11 Speed (new)
Derailleur: Shimano Deore M5100 (new)
Cassette: E13 9-46T
Cranks: Race Face SIXC carbon (170mm) w/ 32T Works Components oval ring
Chain guide: E13
BB: Race Face
Wheels: 29" Spank Oozy 350 laced to DT Swiss 350 Hub w/ SRAM Torque Caps front, 27.5" Spank Spike 350 Vibrocore laced to Industry Nine Torch Hub (120 poe) rear
Tires: Minion DHF 2.6 3C EXO+, Butcher BLCK DMND 2.6
Dropper Post: PNW Cascade 170mm
Saddle: SDG Circuit Ti-Alloy