Oct 18, 2019 at 12:251 days
200 mm 6 bolt rotors $28 shipped each
Added 24 photos to Buysell
Oct 14, 2019 at 22:07Oct 14, 2019
Oct 13, 2019 at 13:12Oct 13, 2019
Great shape, no dings. Some minor scratches and they’re a little dirty with dried sealant but should be able to be cleaned off. Front has SRAM Torque Caps. XD driver. Super fast hub engagement at 120 poe. 12x148 rear, 15x110 front. Can include the 200mm rotor for an extra $20. Front has rim tape that’s still good. Rear will need rim tape, both come with stem valves. 148 12x148mm 110 15x110mm gold
Oct 13, 2019 at 12:53Oct 13, 2019
Bike is in great shape, ready to ride. The chainstays have chain rub on one side and shoe rub on the other, only aesthetic, no structural damage. Bike comes with either an Ohlins TTX 22 M (158mm rear travel, 216x63mm) or Cane Creek Double Barrel Air CS (176mm travel, 222x70mm with offset bushings to make the eye to eye 218mm. 2mm difference raises the BB by 5mm and steepens the STA and HTA by 0.5 degree, but the 27.5 rear wheel counteracts the effect by dropping the BB 10mm and slackening the HTA and STA by 1 degree). Price listed is with the CCBD, if you’d prefer the Ohlins it’s an extra $150, or $350 to have both shocks. Bike also comes with rear axle dropouts for both 148mm (installed) and 142mm if you want to run a rear wheel that isn’t boost. Specs - Fork: Lyrik RC2 170mm Shock: CCDB Air CS (like-new condition) or Ohlins TTX 22 M (tuned for the bike, comes with a super light Ti-Springs Race Ti 400 lb spring) Handlebar: ProTaper Carbon Riser cut down to 790mm (less than 200 grams) Stem: Wren Alloy 50mm (74 grams) Brakes: SRAM Code RSC w/ 200mm rotors Shifter: Shimano XTR M9000 11 Speed Derailleur: Shimano XT M8000 (brand new) Cassette: E13 9-46T Cranks: Race Face SIXC carbon (170mm) w/ 32T Works Components ring BB: Race Face Wheels: 29" Spank Oozy 350 laced to DT Swiss 350 Hub w/ SRAM Torque Caps front, Spank Spike 350 Vibrocore 27.5 laced to Industry Nine Torch Hub (120 poe) rear Tires: Minion DHF 2.6 3C EXO+ front, Butcher BLCK DMND 2.6 (Huck Norris tire insert in rear) Dropper Post: PNW Cascade 170mm Saddle: SDG Circuit Ti-Alloy
Oct 12, 2019 at 9:30Oct 12, 2019
Great condition, 450 lb rate, Should work for all of the following - 2.5 or 2.75 stroke. 57.5 to 70mm stroke
Oct 11, 2019 at 19:54Oct 11, 2019
Direct mount stem for dual crown fork (Boxxer, Fox 40, etc). 50 mm length, 31.8mm bar clamp. Great condition.
Oct 10, 2019 at 13:48Oct 10, 2019
In excellent condition, second owner. Comes with a 500 lb spring. Climb and downhill are the two modes. I can include a really light titanium spring (500 lb) that has one season of use on it for an extra $60. Was originally tuned for a Rocky Mountain Slayer, but I was using it on another bike that also uses an ML tune and it worked great. 11/6 230x65 230
Oct 10, 2019 at 10:49Oct 10, 2019
Like-new condition. Has a total of 12 miles on it. Steerer cut to 6 3/4 inches. 200mm travel 46mm offset 20x110 hub spacing Charger damper DebonAir spring
Oct 8, 2019 at 13:04Oct 8, 2019
For wheels up to 29”. Not much use on it, works like new. Comes with 12mm and 15mm hub inserts for rear and front.
Oct 7, 2019 at 17:07Oct 7, 2019
Two lightly used rotors. 220 mm. One is centerlock and the other 6 bolt. I have a centerlock to 6 bolt converter I can include if both of your hubs are centerlock.